Engine conversion at Amoil? or other workshop?

[hattech-v]

aja, that piping is RSR aa?

 

[aja]

aja, that piping is RSR aa?

Tak. Customised punya. It's 2.2" stainless steel & following accord route!!

 

[hattech-v]

oh ok..

 

[NiCkY7]

no problem! BTW, have u sent your SV4 to workshop? Which workshop?. If nearby, hopefully can pay u a visit sometime!!

not yet send... ><

now dilemma choosing workshop... if is Amoil, then next month baru sent, cause some ppl said they busy with MME track car setup...

u got any suggestion for nice workshop?

friday i may go scout some other workshop and ask some info...

 

[harpoon]

nicky.... contact jacky amoi and ask alot of questions..... so you can be satisfied before u decide. but this month they're busy...got 5 cars to prepare....even the mech goes home at 9-10pm
my conversion was even done there... n no complain till now

avantgarde is also another good workshop....from the words that we can gather here

 

[NiCkY7]

nicky.... contact jacky amoi and ask alot of questions..... so you can be satisfied before u decide. but this month they're busy...got 5 cars to prepare....even the mech goes home at 9-10pm
my conversion was even done there... n no complain till now

avantgarde is also another good workshop....from the words that we can gather here

woot... thanks for the info...

 

[aja]

not yet send... ><

now dilemma choosing workshop... if is Amoil, then next month baru sent, cause some ppl said they busy with MME track car setup...

u got any suggestion for nice workshop?

friday i may go scout some other workshop and ask some info...

My friend's workshop name is HMS PERFORMANCE. Located at Bt. 3 S. Alam there. Donno he is good or not, but so far he serve me well. Wiring works also nice. So far, he converted my Detomaso & current Euro R. Prior to this, i did recommend a few of my friend to convert at his place also.

Whenever u scouting for a halfcut, if possible try to ajak your mechanic along. Normally they will knwo which is good, which one is not.

As for me last time, i did ask my friend (HMS Ha***) to check for me the halfcut condition at the kedai potong first. Later, can kawteem with the tokey also the halfcut price.

 

[vtecer]

My friend's workshop name is HMS PERFORMANCE. Located at Bt. 3 S. Alam there. Donno he is good or not, but so far he serve me well. Wiring works also nice. So far, he converted my Detomaso & current Euro R. Prior to this, i did recommend a few of my friend to convert at his place also.

Whenever u scouting for a halfcut, if possible try to ajak your mechanic along. Normally they will knwo which is good, which one is not.

As for me last time, i did ask my friend (HMS Ha***) to check for me the halfcut condition at the kedai potong first. Later, can kawteem with the tokey also the halfcut price.

Aja,

Your mechanic in S.Alam are they good in maintaining and tuning the H22A as well. If they are good, what is their location, add?

 

[danieL]

try avantgarde mechanic......confirm will be satisfied.
they do a lot of hondas also...
look at sepat super fast car!!
but yeah, eric and james also damn friendly

 

[aja]

Aja,

Your mechanic in S.Alam are they good in maintaining and tuning the H22A as well. If they are good, what is their location, add?

Vtecer,
Donno can tune H22A or not, cause mine i never asked him to tune ! Maintenancewise, so far ok lah for me! But car wiring, confirm damn nice!. Can rely on him on that.

But if u really need the info, i'll publish it here once i got the address!!

 

[NiCkY7]

bang aja,

how about exhaust shop? any nice to intro? i wanna look for some nice muffler for reasonable price... hehe...

 

[vtecer]

Vtecer,
Donno can tune H22A or not, cause mine i never asked him to tune ! Maintenancewise, so far ok lah for me! But car wiring, confirm damn nice!. Can rely on him on that.

But if u really need the info, i'll publish it here once i got the address!!

Appreciate it my friend. Anyway, where you tuned your power plant? :rolleyes:

 

[vtecer]

try avantgarde mechanic......confirm will be satisfied.
they do a lot of hondas also...
look at sepat super fast car!!
but yeah, eric and james also damn friendly

SS2, right! Apprecite it if you could give me some guide there, landmark or something. - Cheers

 

[aja]

bang aja,

how about exhaust shop? any nice to intro? i wanna look for some nice muffler for reasonable price... hehe...

No specific kedai to intro la Nicky. I got mine last time at SS Racing, but of course $$$ la cause it's aftermarket one.
My suggestion is, if u want to buy branded new one... where else?. Sunway but be prepare to pay extra $$$.

As for secondhand branded one...have to scout around especially kedai potong. BTW, u can call these guys and asked :- 1. Hong 012 2179503. 2. Ah Wah 012 2599967

 

[aja]

Appreciate it my friend. Anyway, where you tuned your power plant? :rolleyes:

Never tune my car, cause still running on stock air filter!. I'll put the address here later.

 

[Civic-R]

Why nobody recommend N1?Got free dyno wor....

 

[SePaT]

try avantgarde mechanic......confirm will be satisfied.
they do a lot of hondas also...
look at sepat super fast car!!
but yeah, eric and james also damn friendly

yeah yeah


super duper labi labi...


kekekekeke


that's u called fast?? aiyoooooooooo

 

[crower75]

yeah yeah


super duper labi labi...


kekekekeke


that's u called fast?? aiyoooooooooo

Faster than a speeding bullet...........that's SePaT's RiDe !!!

SePaT doesn't care about Horse Power...he has this power :elefant: heheh

 

[SePaT]

Faster than a speeding bullet...........that's SePaT's RiDe !!!

SePaT doesn't care about Horse Power...he has this power :elefant: heheh

hahaah ptui!

 

[hotspeed]

Bro NiCkY7....if u really wan to find someone expert to transpant ur engine n with the price that cheper than those branded shop...i can recommend u my mechenic...last time he worked in amoil...if u interested tell me..i`ll give u the info of the workshop...