Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="mrbear" data-source="post: 1535842" data-attributes="member: 19881">well im bored. off for 3 days. so went to my mech,to repair my VTEC solenoid pressure switch gasket. so now my car no leaking at all.so my cover is a bit dull,very ugly,peel offs chips. so decide to spray.what u/i need to buy for this project?1) paint removal for metal2) small paint brush3) 15vermillion + 33red (spray can code)4) sand paper/scrapper/clotch/newspaperhow it starts!1) remove my H22A cover. http://img257.imageshack.us/img257/6820/111bb6.jpg2) using paint brush,brush all over the cover. n wait for 5-10 minutes. (be extra careful,because the paint remover is an acid,u will shouting if those liquid get in touch with ur skin)http://img180.imageshack.us/img180/606/12yz9.jpg3) brush if off with paint brush n also water.http://img193.imageshack.us/img193/1501/14cd5.jpg4) how it looks like when the original paint is remove. (u need to sand paper for this part for smooth surface)http://img477.imageshack.us/img477/6940/252242gw1.jpg5) undercoat ur cover,with white or silver,very thin layer of spray. let it dryhttp://img193.imageshack.us/img193/3016/23522da7.jpg6) spray it. switch over from 15vermillion to 33red. 2-3 times n spray another cans. spray it slowly. normal spray can technique of spray. left to right,right to left.http://img477.imageshack.us/img477/100/dsc00023sk6.jpg7) the cover when its dry,n ready. (oops sorry,its not yet completed). need to re-paper sand it back. re-sand it till the color bit dull. just to make the paint sticks to the metal valve cover. http://img477.imageshack.us/img477/3329/433473737xt5.jpg* to be continued.on next part. i will re-sand paper it,to make the paint sticks to the metal. then re spray again. n also remove the paint from DOHC VTEC. wait for me!</blockquote>

Verification

The Marketplace Latest

original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

what's the best rims for vios 07 1.5g

ENKEI PF01 / PF02 / SC03

they have all the same prices here in japan so i can't decide what to choose.

PF01 - SILVER and BLACK , only available

PF02 - SILVER - only available

SC03 - MMB,SBC,SILVER - only...

GREDDY Turbos on Offer

We've got some special clearance GREDDY turbos on offer.
ALL Brand new and genuine.

View attachment 673814

The following are available on order....

TD06L2-20G 8.0cm
TD06SH-25G 8.0cm
TD06SH-25G 10.0cm...

Cusco Hyper Single plate clutch for evo 4-8

Cusco Hyper Single Plate clutch for Evo 4-8.

selling at RM1600

interested pls call 012-2988 288.

http://i139.photobucket.com/albums/q315/RAPTORIE/Image005.jpg