DIY GROUNDING

[edwin_lcw]

hey i got a 5 point liao ..... so now i wanna look for another 3 wires to make to 8 point ..... i wan a yellow 4 awg cables ..... anyone has idea whare to get it ar ?

 

[c-ground]

we have the source but the demand is too low to get a whole spool of 30m 4awg.

 

[nitrus]

ok.... i grounded the

1) bulk head
2) firewall
3) distributor
4) engine head

but the Alternator ... it's too low below the engine there la... i can't reach in, even if can, no space to twist the spanar and unscrew the nuts/screw...

i was advised by huakenny to just place the grounding kit in the long 12mm screw at the alternator there, and take a nut n screw it in place....

but all the nut i try also kenot fit the long screw at the alternator there....

n i cannot open any screw on the alternator ... :frown:

what can i do?

 

[huakenny]

hey i got a 5 point liao ..... so now i wanna look for another 3 wires to make to 8 point ..... i wan a yellow 4 awg cables ..... anyone has idea whare to get it ar ?

lol..told u i got rite? hehe..let me know then

 

[huakenny]

ok.... i grounded the

1) bulk head
2) firewall
3) distributor
4) engine head

but the Alternator ... it's too low below the engine there la... i can't reach in, even if can, no space to twist the spanar and unscrew the nuts/screw...

i was advised by huakenny to just place the grounding kit in the long 12mm screw at the alternator there, and take a nut n screw it in place....

but all the nut i try also kenot fit the long screw at the alternator there....

n i cannot open any screw on the alternator ... :frown:

what can i do?

u buy the wrong nut...ask from ur seller for the right nut if u not sure which nut....

 

[c-ground]

just ask for 12mm nut.

 

[nitrus]

huakenny, my seller "ijoe" asked me to use cable tie to tie the cable n alternator screw together ... what do u all think? correct? wrong?
i was told its not good to use cable tie to tie them together...

c-ground : the shops i go to dunno bout nuts.. -_- i have to find myself.. haih.. dunno which shop to go to around PJ .. any suggestions ?

 

[huakenny]

huakenny, my seller "ijoe" asked me to use cable tie to tie the cable n alternator screw together ... what do u all think? correct? wrong?
i was told its not good to use cable tie to tie them together...

c-ground : the shops i go to dunno bout nuts.. -_- i have to find myself.. haih.. dunno which shop to go to around PJ .. any suggestions ?

erm..if u got come wangsa maju o setapak..sms me la.i gv u the nut...settled

 

[c-ground]

Forget about tieing the alternator scrw and the cable lugs. Cable ties!??! He must be joking (no offence ijoe).

Get a nut from kenny.. or if you happened to come to Seri Kembangan.. get one free from me lar.. Any hardware shop will have 12mm nuts lar.. otherwise, ask for one sample, test it out first in front of the shop.

 

[nitrus]

tnx guys.. reli appreciate the kindness.. if i reli reli cant find the nut i will try ask u all ..
regret la buy from ijoe, (no offense ijoe, but this is reli wat i experience) .. his aftersales help.. see like he dun care already lepas jual barang.. somemore he said "no prob!" when i ask "confirm can use cable tie to tie the cable n alternator? battery current can go thru?" ... :thumpdown: tak tau la... last time when i ask him whether its RM38 including installation in PM, he said yes. but when meet up that time he say the engine bay too hot la bla bla.
my mistake la buy from wrong ppl i guess.. feel like i kena con.

so anybody that next time wan to buy grounding cable.

The best ppl to buy grounding cable from in ZTH is Huakenny n C-ground .

i din buy from them also they r so ever willing to help me.. (i also malu la) altho maybe their cables abit more expensive but u'll b more satisfied after that.. believe me.. Dun kena con like me again.

cheers..

 

[c-ground]

NOT get conned lar.. big time seller sometimes are busy not like c-ground.. kekeke!!

 

[huakenny]

hehe...dun praise me like tat le....the nut i hv le...u sms me la....sometimes i wil at ikea,pyramid,cheras...maybe u wil at there oso..

u got my number rite? i help u ground la the alternator....

tnx guys.. reli appreciate the kindness.. if i reli reli cant find the nut i will try ask u all ..
regret la buy from ijoe, (no offense ijoe, but this is reli wat i experience) .. his aftersales help.. see like he dun care already lepas jual barang.. somemore he said "no prob!" when i ask "confirm can use cable tie to tie the cable n alternator? battery current can go thru?" ... :thumpdown: tak tau la... last time when i ask him whether its RM38 including installation in PM, he said yes. but when meet up that time he say the engine bay too hot la bla bla.
my mistake la buy from wrong ppl i guess.. feel like i kena con.

so anybody that next time wan to buy grounding cable.

The best ppl to buy grounding cable from in ZTH is Huakenny n C-ground .

i din buy from them also they r so ever willing to help me.. (i also malu la) altho maybe their cables abit more expensive but u'll b more satisfied after that.. believe me.. Dun kena con like me again.

cheers..

 

[nitrus]

no problem bro huakenny .. i talk wid u in msn k? i will try my very best to find the nut first .. i just only buy another nut today... but this time the nut is slightly too big ... aihhhh..
either will be bit too small, or bit too big .. stupid laa !!!! -___-

cground : busy different thing la.. but ijoe shouldn't give wrong info juz coz he malas layan his previous customer (me) right? dunno la.. dun care ady. wat to do .. i made mistake, can only tell other ppl bout better choices n better helpful ppl to buy from.. (like u and huakenny) cheers..

 

[c-ground]

cground : busy different thing la.. but dun give wrong info juz coz u malas layan ur previous customer right? dunno la.. dun care ady. wat to do .. i made mistake, can only tell other ppl bout better choices n better ppl to buy from.. cheers..

wooi.. those who didn't finish all the posts might think that you are imposing us (c-ground: drex and khguan) ler...

edit a little bit lar.. haha!!

 

[huakenny]

wooi.. those who didn't finish all the posts might think that you are imposing us (c-ground: drex and khguan) ler...

edit a little bit lar.. haha!!

LOL.dun woli la...ppl wil read previous posts.....dun scare....haha

 

[chilskater]

to ground the kancil alternator, we need nut n bolt rite?to put in suitable place near the 12mm or 14mm nut rite?i done my gearbox ground yesterday...add other nut n bolts to the lubang at the side of it..ada betul ka?

 

[huakenny]

to ground the kancil alternator, we need nut n bolt rite?to put in suitable place near the 12mm or 14mm nut rite?i done my gearbox ground yesterday...add other nut n bolts to the lubang at the side of it..ada betul ka?

alternator there u can see there is a long screw...12mm one..juz use 12mm nut n ground it there...ok oledi..

o u can loosen the 8mm screw/nut at ur alternator housing n put ur cable n tight it back the screw/nut...

either one...

 

[chilskater]

pic plz?

 

[huakenny]

pic plz?

i dun hv photo of alternator le....

see who member got 1st....wait them to post...

 

[chilskater]

that one bukan cover for timing belt ka?