daihatsu charade g100 steering not return

[dewagame]

i have installed an engine from toyota starlet(4efte) on my car. i’m using the original g100 knuckle and every thing that install with it i.e. lower arm, suspension, sway bar....but the steering rack is from toyota starlet.
the problem is my steering does not return to original state(center) after i’m taking a corner just like other car..

help me sifus

charade starlet

 

[ken yeang]

wheel allignment sudah lari....Send to tyre shop to sort it out, bro

 

[dewagame]

i have sent for alignment..and change front tyre...balancing...but still dont return

 

[Izso]

There's another possibility - your power steering rack is spoilt. It's supposed to have some sort of tension when you turn, is there any tension at all or does it even try to return back to middle? These cases it's cheaper to replace with a halfcut

 

[DanzEterna]

check lower arm bushes.

 

[john_unai]

I have exactly the same problem with my car. half turn is ok, more than that the steering wont return. when i ask foremen, he said maybe because my tyre is wide causing this problem. I just ignore it since i already use to it.

 

[Kopi]

Are you using suspension with bodyshift?

 

[achik85]

Me to!i am the owner of charade 4e n yup.the steering wont return back to center..:(

 

[dewagame]

is it solved now...first what should i do..check the steering rack or...and one more question.....is this problem can be solved?...

 

[achik85]

How to solve it?

 

[ken yeang]

is it solved now...first what should i do..check the steering rack or...and one more question.....is this problem can be solved?...

Firstly, it sounded like the TS has found answer..........but then he posed a question?? hmmm

 

[dewagame]

confused?? i just wanna know does this problem can be solve or not? thanks for iur feedback:-)

---------- Post added at 02:18 PM ---------- 6 hour anti-bump limit - Previous post was at 02:17 PM ----------

sorry for my bad english

 

[hoangkien1sales]

i have installed an engine from toyota starlet(4efte) on my car. i’m using the original g100 knuckle and every thing that install with it i.e. lower arm, suspension, sway bar....but the steering rack is from toyota starlet. the problem is my steering does not return to original state(center) after i’m taking a corner just like other car.. help me sifus charade starlet

upppppppppppppppppppppp phụ chủ thớt

 

[vr2turbo]

i have installed an engine from toyota starlet(4efte) on my car. i’m using the original g100 knuckle and every thing that install with it i.e. lower arm, suspension, sway bar....but the steering rack is from toyota starlet.
the problem is my steering does not return to original state(center) after i’m taking a corner just like other car..

help me sifus

charade starlet

Is the steering heavy? So you only change the engine and steering rack only. Was it plug and play or did you need to mod it in?
Usually self centering for steering is the caster angle. Check whether this was changed during the mod?
Since you mentioned everything else is still the g100, looks most likely to be the rack problem.

 

[dewagame]

Is the steering heavy? So you only change the engine and steering rack only. Was it plug and play or did you need to mod it in?
Usually self centering for steering is the caster angle. Check whether this was changed during the mod?
Since you mentioned everything else is still the g100, looks most likely to be the rack problem.

Thanks,
U help me fix it..