Cheap & Nice Exhaust Muffler!

[EFN]

Alow! Alow!!!

RM150 for a 5 months old Hotbits (Made in Australia) muffler. Comes together with mounting points for AE101 & AE111 (maybe AE92 can too but have to adjust a bit). S Flow construction. But please take note that this mufller is not a Quiet Type (very bassy)

This muffler is setup for High Revving and the size is 2.5". Along with the Muffler is a very-very neat and clean S section Mandrel Bends which is made from Stainless Steel 2.5" pipes and welded using TIG (Intercooler Welds) - the S bend alone cost me RM90.

I can coonfirm that this muffler is absolutely sweet for High Revving 4A-GE setup and Supercharger or any Turbo car that uses 0.8BAR boost and below.

Can also be used in other car, all that need to be done is to ask the exhaust installer to relocate the pipe and mounting points.

Why am I selling? well let's just say that i have upgraded to APEK N1 from Japang hahahahha.

TQTQTQTQTQ!!!!
http://img.photobucket.com/albums/v645/EFN/Hotbits1.jpg

http://img.photobucket.com/albums/v645/EFN/Hotbits2.jpg

 

[EFN]

Monday morning Bump!


Price NEGO!!!

 

[EFN]

lunchtime bump hahahaha

 

[EFN]

Nego! Nego!

See item to justify.

 

[jacthegreat]

efn dude .. what are the consequences if this muffler installed onto a Sgti (4G93) ? will be underpowered or lack on the pick-up but good on the top speed and etc.

i'm curiously interested ... :cool:

 

[EFN]

efn dude .. what are the consequences if this muffler installed onto a Sgti (4G93) ? will be underpowered or lack on the pick-up but good on the top speed and etc.

i'm curiously interested ... :cool:

Generally, a 2.5" exhaust system are meant for peak power output and most of the time will not improve low RPM response. But once revved above 3000RPM the acceleration will be really significant. Depend on how you drive, some prefer early pick-up, some prefer outright peak power output. Thanks for asking

 

[jacthegreat]

efn dude .. u got pm.

 

[Ray]

Wow!
Free Boobs!!!

 

[EFN]

I wan free boobs hahahahahaha

 

[faisalacj]

location and contact number?
can put in to other car?

 

[GRexer]

Don't mind asking, what did u use to paint the muffler? Am looking for some good paint to paint on my faded muffler :D

Was thinking of using hammered black from Hammerite to paint but ain't too sure if it can stand the heat of the exhaust.

BTW, where to get the exhaust TIG welded as well? :D

 

[EFN]

Dear All,

Exhaust has been SOLD - Thank you to exeryone!

GRexer:
The paint is a Normal Flat Black No.29. Yes Flat Black can last if used on mufflers. Hammerite is even better.

TIG weld can be done by Jaafar at Sunway or any other reputed Intercooler Welders.

 

[GRexer]

Hm... that's just normal flat black? Looks like a hammered finish :D Hm... i'm just unsure whether hammerrite would be able to withstand the heat, hence my question, coz i have some left after i used it to paint on my new undercarriage bits before fitting them onto my Wira. ;)