Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Danny" data-source="post: 197468" data-attributes="member: 132">My recommendation :-AMD Barton 2500 @ 3200+ - RM350 (overclocked)SI-97 heatpipe cooler + Delta 51cfm - RM230Abit NF7 - 280512MB Kingston DDR400 Ram - 330120GB Sata HDD - RM350128MB Radeon 9550xt (128 bit) w/3.3ns ram - RM400Tsunami casing w/400w psu - RM18019in Samsung 955df - RM710Logitech optical mouse & kb - RM100Battlepad pro gaming mousepad - RM30All in all it can play all the latest games like Half Life 2 at 1024x768 & need for speed 2 underground but Doom 3 only at 800 x 600 medium specs (unless you upgrade to 128MB RAdeon 9800 pro (256bit) or higher (X800 pro/xt).</blockquote>

Verification

The Marketplace Latest

BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body
BMW f30 mad style front skirt lip
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 gts front bonnet hood with scoop
- Started by jeff6126
- Exterior and Body
Proton saga gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 Msport front skirt lip
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer/Inspira Varis Front Bumper
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Walbro internal fuel pump

Hye there veterans, just wanted to ask something regarding fuel pumps, im using a ae100 corolla with an internal racing fuel pump Walbro 255, can i use my car until the tank is below half? because my mech told me if...

Airtrek Turbo vacuum pressure at idle

Hi, I am going through the process of making a few upgrades to my Airtrek and I was wondering what the range of vacuum pressures were at idle.

Mine has been at around 12 InHG (-6 PSI) since I fitted the boost gauge...

wt-ask: fender bar for CT9A

anyone know if there is any fender bar for CT9A ?

this one from J-Speed, anyone know where to find in malaysia ?
they call it "side tower bar".

http://i241.photobucket.com/albums/ff55/boonewe/jbrace.jpg...