Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Zenn" data-source="post: 2930882" data-attributes="member: 15503"><p>actually its low pass for the 6.5" and highpass for the 3.5". if u want to go jln pasar, they also have ready made passive crossovers for sale. only thing is u might have to change the coils and inductors to get the 500hz crossover point, which is around 80microfarads capacitor and 1.27milihenry inductor, assuming both speakers are 4ohm and if u are planning simple 6db or 1st order passives. maybe u want to do some research on passives first. lot of info on the net....</p></blockquote><p></p>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Happy Besday Mr P @ Leslie!

View attachment 694745

AC Schnitzer goes Green with 552bhp LPG V10 E92 - ACS GP3.10

Driving pleasure has been written large at AC Schnitzer for 20 years. And happily, nothing will change for...

DIY pedal pads

I am thinking to DIY a new set of pedal pads based on the Razo design using thick aluminium sheets
http://www.imotorgear.com/assets/product_images/21020000P033.jpg

Only problem i have is mounting it.
Do i mount it...