4G93 with 4G13p gearbox

[invisible4v]

hi guys,

i'm going to transplant 4G93, my foreman said he can do it without changing my current 4G13p gearbox, issit possible? Will there any hidden prob?

Thanx

 

[putra4767]

gb

Bro, dun make the mistake !

I used a 4g13 g/box for a while due to my g/box under repair...

The car will not have any power at all...especially on gear
4 & 5...

1, 2 & 3 a bit ok but it never is the same with the F5M222
1.8 g/box....

It's a waste of time & money.....

 

[badguy]

yeah correct
don't even think about using 4G13p gear box for a 4G93!

1. higher FC
2. low durability
3. less power

even my 4G91 with 4G13p gear box i also regret
3k rpm only 90Km/h
original 4G91 gear box 3K rpm at 100km/h

every one hour with same RPM i lost 10KM
have to shift gear more frequent

 

[gsrTurbo9166]

yup agree with putra4767
don do it bcoz when u tarik ur car kaw kaw ur gearbox sure habis 1
so use back the 4g93 gearbox la
it is easier

 

[jawoliso]

Need your advice guys. How about 4G92 with 1.3 gearbox?

 

[xcheong]

when u change the engine, it is advisable to change with the gearbox as well.
4g13 have very short ratios and short final drive. u can rev faster, but no top speed, and loss all the power.
if give wrong info, sorry arr... just my 2 cent

 

[invisible4v]

thanx for reply,
does anyone know how much is a mitsu 4G93 halfcut?

 

[aarion]

now, super expensive. and hard to find. Price would RM4k plus.

 

[putra4767]

gb

U r asking bout 4g93T or 4g93P ?

4g93T Auto shud be rm 4.5k
4g93T Manual shud be rm 5.5k

sumwhere round that....

 

[alray]

Higher engine capacity (cc) means that there is higher torque in an engine (layman's term-better pulling power), therefore the gear ratio would be further apart which coherently would be giving u better delivery of power within a power band. Having an unmatched gearbox fitted to it, would not only deprive you of the engine's performance but also puts a hole in your pocket - fuel consumption, unnecessary wear and tear of your engine and gearbox, clutch etc..

I have a complete Mitsubishi 1.6 MIVEC engine and gearbox, wiring, computer box etc for sale if u are interested. RM 4.5K. Call:017-3366068

 

[kksoon]

yes...there r right....dont ever try it.....I'm using 4G92 with 1.5 local gearbox & @ 3k rpm oni not more then 95km.....shit...have to shift gear more frequent....wat say if u r using 4G93 (P or T)leh..."is not hard to imagine" with samsung

 

[yloon]

i m using F5M21 (99 models 1.5 wira) now using its gearbox with 4G92P, the tarik part not long lasting, but the touque is superb. 100km @ 5th gear near to 2950RPM (below 3K),
1st gear too powerful also... hahaha... just my feedback... any other gearbox better than F5M22(GTi or Putra)?

 

[alien]

how much is a 4g93P halfcut in the market rite now?

 

[thteh86]

mivec gear box!!!!!

 

[yloon]

MIVEC Gbox no good lah.. for drag is good only.. it make it high RPM cos need to open MIVEC mah.... 3krpm i think 85kmh only...

 

[thteh86]

that one depends on your ECU, and depends on how does the engine runs, the others are just gear ratio, Mivec has great final drive