Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Pyn_57" data-source="post: 383097" data-attributes="member: 4283">Heelllo .......................yong....he...happy la you kete dah keluar.....for you all information for standars block & piston 4g91.... actually not enought power la..... for my experince....la....1. comperition 4g91 block with 4g92/93 is the high.... let say the block 4g91 we bore and using 4g92/93( same ) piston into the block.....will up a bit power butttif using block 4g92/93 block is will be more power......2. if we combain 4g91 with mivec head....... the mivec system will be on at rpm 5000 rpm the limit around 7500 rpm or more but if using 4g91 block ( standard piston) max limit you can get only 6200rpm ....itu pun kalu ble dpt....so on that time camner lak nak balance the mivec systems....mivec tak nak gile masuk pastu terus cut off....... 3.now i mix 4g91 stock with weber.....3rd gear 140..kmh....top spedd blum lagi...4g91 actually only more better from 4g15/13 not from 4g92 p......every depend on your setting/tunning.......( dont always believe with the mechanic....but your self about the logik )sori my english not so good...........</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

4-2-1? 4-1? Extractors broken down!

I pretty much know what I want in my extractors. It has to be tuned length, ceramic coated, mandrel bent and I want a 4-2-1 setup. But I get...

Fuel cut or boost cut?

Guys,

Initially before I change my exhaust, my boost was set at 0.9bar and at full-boost there is no drop or creep in boost.

Now after I change exhaust, I notice that I can't hit full-boost at all, the boost will...

trust PE ti-R for sale!!!

trust PE ti-R for sale....rm2500 nego...

View attachment 646916

please call me at 012-6077811,dun reply here...thanks!!SOLD THANKS!!