4G91 Gang..

alvin24 said:
4G91 Gang TT

Date: 6 August (1st saturday of the month!)
Time: 1pm
Venue: Iskandar mamak, Sunway Extreeme Park

Confirm list (number):
1. alvin24 (012-2322996)
2. tajulsans (019-3341152)
TBC. cossie (+60162818393) --- may still be in johor



c'mon people!

yer la guys... last time every body was so ancious to TT, now we are seriously doing it.. dont worry, not knowing each other doesnt mean cant be friend boo.. if not i will ****** with alvin oni.. :D

btw, i dont know how to go to ah yoong place laa.. need tourist guide.. hehe
 
wah... 2 ppl ****** meh? hahaha... me oso dunno how to go ah yong's place... =Þ If not many ppl come... i meet tajulsans... kautim some business... then accompany friend go down klang look for rims liau loh... =Þ
 
alvin24 said:
4G91 Gang TT

Date: 6 August (1st saturday of the month!)
Time: 1pm
Venue: Iskandar mamak, Sunway Extreeme Park

Confirm list (number):
1. alvin24 (012-2322996)
2. tajulsans (019-3341152)
TBC. cossie (+60162818393) --- may still be in johor
3. Rekalo

c'mon people!

my car will be at ah yoong shop...pakai motor can ha ?
atau pun tompang dgn party joe can ha ?
 
aiseh..miss again...me.. kena balik kampung...kalau tak.. boleh join...rugi...rugi...btw...hope 2 see yours new engine alvin24..mesti power punya...nanti boleh turun ilmu sikit...hehee...hee..

come geng...other 4g91 users...come la...join ours TT..dont segan..segan...
make new friend...syok beb....
 
ijoe said:
aiseh..miss again...me.. kena balik kampung...kalau tak.. boleh join...rugi...rugi...btw...hope 2 see yours new engine alvin24..mesti power punya...nanti boleh turun ilmu sikit...hehee...hee..

come geng...other 4g91 users...come la...join ours TT..dont segan..segan...
make new friend...syok beb....


dont worry lar bro... there is always a next time... anyway hope dat rekalo can b our cameraman again:D ...
 
fuyoo...alvin24...u tarak ajak me ar...wuahahha...nice ENGINE of urs.:P
 
wah... where got where got? Tot u know bout this thread? Aiseh... come TT, come! hahaha...
 
ahahha...2day we all wan 2 go tat ah yoong's place but no 1 knows the way there...go mat speed tutup pulak..really no luck huh...hahahaha
 
hahaha... =Þ The ah yoong's workshop regulars all tarak datang... apa mau buat?? It was nice meeting the few 4G91 kaki that came... tajulsan+friend. =) yong i met before earlier... hehehez.
 
i am new here

halo guys... i am new here... need some help from all the experts here...

i put 4g91 into my car last oct, nothing done up, all standard, just the extractor, cos the original one was broken when it was still in the half cut, got some cheap stuff from wei yip(?). then recently i face problem when i on the aircon. it is like when i press the clutch, the rpm will drop to almost 0, then jump back, then drop again, just like a spring. about two to three times before it gets stable again. got a few times the engine also mati. i went to workshop, a fella say it is my throttle body, and i got it cleaned up. but it is still like that. i got ask around, some ppl say it is my air flow sensor. but i really can't figure out how come the air flow sensor have got things to do only when the air con is on. during nite time lagi worse. if on the light and aircon, when press clutch that time, engine every time also like want to mati like that... rpm jumping few times then only stable. so any sifu here come accross this problem before? my friend say it is the speed sensor in my meter, but i scare if i go kereta potong and get a second hand meter, it is still like that. any sifu have any idea what is going wrong with my car, please help. thank u very very much. :)
 
ah yooonnnnngggggggg

haiyaa..milo.. dono coz l'm new hre. Come and see ah yoong la,
sttle prblem.

no budget no mod...stndrt 4g91 lo. lm at bdr tsik sme wth ijoe..
ijoe why dnt pick up phone...grding cble.
 
milo said:
halo guys... i am new here... need some help from all the experts here...

i put 4g91 into my car last oct, nothing done up, all standard, just the extractor, cos the original one was broken when it was still in the half cut, got some cheap stuff from wei yip(?). then recently i face problem when i on the aircon. it is like when i press the clutch, the rpm will drop to almost 0, then jump back, then drop again, just like a spring. about two to three times before it gets stable again. got a few times the engine also mati. i went to workshop, a fella say it is my throttle body, and i got it cleaned up. but it is still like that. i got ask around, some ppl say it is my air flow sensor. but i really can't figure out how come the air flow sensor have got things to do only when the air con is on. during nite time lagi worse. if on the light and aircon, when press clutch that time, engine every time also like want to mati like that... rpm jumping few times then only stable. so any sifu here come accross this problem before? my friend say it is the speed sensor in my meter, but i scare if i go kereta potong and get a second hand meter, it is still like that. any sifu have any idea what is going wrong with my car, please help. thank u very very much. :)
It sounds like ISC problem to me..
 
Ah Yoong

i face the same problem 2... my previous mech ask me to change TB, problem still there.... then ask me 2 use FICD,solve alil bit,but rpm still not stable...
FC very high... then i meet ah yoong.. he check properly n told dat my ISC is working fine so dun need FICD... just needs proper tuning... last saturday i spent 6hrs++ for ah yoong to get it tune... dats y cudnt go TT...sorry alvin,tajul .... ah yoong always give u good results,worth the wait... nw no more crazy idling..rpm damn stable... wasted 130 for the FICD,now lying in my store room...
my advise is it cud the ISC problem, but 2 b really sure of it, get it check by sum gud mechs...
 
Last edited:
how to find this guy called ah yoong?

ok ok thanks for the information....
few days ago somebody asked me to put ficd (is it called ficd?) also... but it was quite costy so i gave it a second thought. any way where can i find this guy called ah yoong? will he charge me a lot? cos i am a newbie... the fc is getting very high also lately. last time half tank can go about 220, now maximum can reach 170 only, and the petrol price is increasing like crazy... god... :biggrin:

by the way any sifu knows whether the manifold for 4g93 is different from 4g91 standard? cos a mech recomanded me this thingie and said that it will increase the performance. but i am not so sure about this. i went around kereta potong to ask, some say they are same, and some say they are different. couldn't make a decision, cos scared kena again... :biggrin:
 
hey guys, how to add a litle bit more power to this engine? i asked my mech, then he kept asking me to change 1.6 or 1.8 block onli... but think about the cost plus jpj stuff... then i get sweating like hell...roti canai can not settle this problem already... sigh... :wink:
 
milo said:
ok ok thanks for the information....
few days ago somebody asked me to put ficd (is it called ficd?) also... but it was quite costy so i gave it a second thought. any way where can i find this guy called ah yoong? will he charge me a lot? cos i am a newbie... the fc is getting very high also lately. last time half tank can go about 220, now maximum can reach 170 only, and the petrol price is increasing like crazy... god... :biggrin:

by the way any sifu knows whether the manifold for 4g93 is different from 4g91 standard? cos a mech recomanded me this thingie and said that it will increase the performance. but i am not so sure about this. i went around kereta potong to ask, some say they are same, and some say they are different. couldn't make a decision, cos scared kena again... :biggrin:
Ah yoong workshop is located at bdr tasik selatan.. If u r free enough, browse back a few pages, there is a location sketch put up by Ijoe.. or u can ask people that frequent there, Ijoe and Partyjoe..

U r talkin bout intake manifold or exhaust manifold.. if exhaust, i think better get an aftermarket ones tuned for ur engine.. mine using 4-2-1 extractor cap ayam also good..
 
milo said:
hey guys, how to add a litle bit more power to this engine? i asked my mech, then he kept asking me to change 1.6 or 1.8 block onli... but think about the cost plus jpj stuff... then i get sweating like hell...roti canai can not settle this problem already... sigh... :wink:
Put snail la.. hahahaha..
 
Bro...mine use 1.8 extractor...original 1.8 japan spec..do weld for o2 sensor...if u want can do upgrade 1.6.. no need to change block..just bore it and put 1.6 high compression piston...better...power..damm good..FC same like before or a little bit high than before..depend how u drive..me now..just same like before...
done at ah yong workshop..
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience