4G91 Gang..

[LancerTerabo]

then the next day sure can compete for D1 hua hua hua

just wondering... drag_on ngan ayel org yg sama ke nie?

bro lancerterabo...wat happen to ur car? y use 4g15 now?

Panjang cite nyer... tapi puncanya sebab timing belt snap... sumer 16 valve aku bengkok... abis tu aku nyer hidrolic problem.... sumer pin tercabut... sebab nya... mech aku pasang tensioner bearing punya nut tak abis... sangkut kat washer...

so... biler pk balik nak buat balik henjin tu... macam tinggi jer kos dia... pastu plaks body kete aku dah agaks reput... so aku amek keputusan nak beli sejibik kete lancer lagi satu... same model... kire dapat package la... org yg jual kete tu tak tau henjin tu dah tuka dari 4G12 > 4G15 dari 1.4 > 1.5...

kete lama aku CKD (1981)... lagipon aku pernah xcden dulu yg kene kat area casis... last time aku henjut... kete aku buat donnut... pastu biler aku check body... body aku dah twisted sket (body roll)... body baru yg aku dapat nie dari model 1980 tp CBU. nampak body dia okeh agi... so planning untuk wat sumtin yg xtream sket kot... maybe nak cari henjin force induction...

tp tak der sen skarang... baru perabis dekat 4k untuk beli kete... maybe kene hold dulu project... kat seremban nie ari tu aku ushar halfcut SR20DET baru 1800... cam menarik jer... hehehhe...

 

[lampakia]

1.8k is cheap...any other engine?hehe

 

[drag_on]

just wondering... drag_on ngan ayel org yg sama ke nie?



Panjang cite nyer... tapi puncanya sebab timing belt snap... sumer 16 valve aku bengkok... abis tu aku nyer hidrolic problem.... sumer pin tercabut... sebab nya... mech aku pasang tensioner bearing punya nut tak abis... sangkut kat washer...

so... biler pk balik nak buat balik henjin tu... macam tinggi jer kos dia... pastu plaks body kete aku dah agaks reput... so aku amek keputusan nak beli sejibik kete lancer lagi satu... same model... kire dapat package la... org yg jual kete tu tak tau henjin tu dah tuka dari 4G12 > 4G15 dari 1.4 > 1.5...

kete lama aku CKD (1981)... lagipon aku pernah xcden dulu yg kene kat area casis... last time aku henjut... kete aku buat donnut... pastu biler aku check body... body aku dah twisted sket (body roll)... body baru yg aku dapat nie dari model 1980 tp CBU. nampak body dia okeh agi... so planning untuk wat sumtin yg xtream sket kot... maybe nak cari henjin force induction...

tp tak der sen skarang... baru perabis dekat 4k untuk beli kete... maybe kene hold dulu project... kat seremban nie ari tu aku ushar halfcut SR20DET baru 1800... cam menarik jer... hehehhe...

Bro...u remember aa...in this 4g91 gang only got 3 ppl just using carb....ayell from segamat....you from subang...and me from kajang....aku orang lain la...tapi kita bertiga je yang pakai carburator dalam forum nieh....tapi sekarang aku pun plan nak tukar EFI dalam hujung minggu nie sebab cuti birthday agong kan...so hantar pegi bikin lah....patut lah senyap sekejap...rupenye beli keta baru...no wonder lah 4g15...eyh then keta lama jual dah ke?...hehehe nanti dah masuk SR20 DET jangan lah lupa pulak gang lama :shades_smile: hua hua hua....anyway hope to see ur project go on soon...

 

[drag_on]

sape kata SOHC kalau belting snap takde ape sangat???? sebab belting lah aku tukar ke 4g91 carb....everything hancussss piston berlubang...12 valve semua bengkok....waterpump pecah...block pun pecah..paling teruk head bengkok...because of this thing happen la...i join this 4G91 GANG....hehehe long live 91'ss hua hua hua

 

[ary4145]

frend..
need ur opinion how to convert 4g91 NA to 4g91T..
maybe one of u got "pengalaman" how to convert to 4g91T..

how much will it cost?
Need to change engine parts arr?? piston, rod and what so ever.

 

[alvin24]

4G93P t'body should be around RM 250-350 like that i think... can't recall the market price for it. =)

 

[ayell]

frend..
need ur opinion how to convert 4g91 NA to 4g91T..
maybe one of u got "pengalaman" how to convert to 4g91T..

how much will it cost?
Need to change engine parts arr?? piston, rod and what so ever.

ary4145,
I think better you browse back 3-4 pages, there is a discussion about BOT on 4G91.:regular_smile:

 

[ayell]

LT,
Got new car already ha? So no need for me to survey for 4G91 head for you la eh? Anyway my mech got one, but one or two of lash adjuster is gone..

 

[tajulsans]

LT, no problem.. still can join the team mah.. Alvin also still around with us what..

 

[Herbie]

Herbie,
who said rear drum cannot stop 100%??? Last time my 4G91 turbo also I running front disc, rear drums... go on track also no problem leer... =Þ As a matter of fact, if your rear drums, go autokhana shiok!! ...easier to do handbrake turns, coz' drum brakes are stronger than discs. Rear discs very difficult to lock the rear wheels. But front I was using perdana discs lar... which are the same as GSR's ones.

serius i dont know why .. my front disc using only stock 4g91 ..:sad_smile: .. 1st time inspection GAGAL .. the 3rd time inspection baru LULUS itupun my untie (JPJ OFFICER) tolong.. Dont want susah kan org tapi terpaksa:embaressed_smile: .. Reason Breking sistem POOR..

 

[Herbie]

Drag_on .. U kajang Lepak mana ?

 

[drag_on]

Herbie
saujana impian...near tesco kajang

 

[drag_on]

4G93P t'body should be around RM 250-350 like that i think... can't recall the market price for it. =)

thanks bro...anyway if i can get mivec oso cun wat..hehe :shades_smile:

frend..
need ur opinion how to convert 4g91 NA to 4g91T..
maybe one of u got "pengalaman" how to convert to 4g91T..

how much will it cost?
Need to change engine parts arr?? piston, rod and what so ever.

ary u go thru our BOT king alvin lah...he got special package for u...cheap also...

 

[Yong_5290]

wah...seems like i'm not the onli 1 wit 4g92 ecu n wiring woo,....

urs ori 4g92 dohc also ar drag on

 

[drag_on]

Yong_5290

yeah...i'm get it from my frend...hehehe..then i'm ur new gang lah

aiyoo today i go to the chop shop and buy 1 mivec 60mm TB....but it quite a pricey lah 250....issit normal price...i afraid i'm being 'potong kepala'

 

[partyJOE]

Yong_5290

yeah...i'm get it from my frend...hehehe..then i'm ur new gang lah

aiyoo today i go to the chop shop and buy 1 mivec 60mm TB....but it quite a pricey lah 250....issit normal price...i afraid i'm being 'potong kepala'

complete wit tps n isc ha...250 is ok lar ... sumfellas sell 300 also..

 

[Yong_5290]

.body...actually if take stock 4g91 t.body skim to 54mm cost like 30bucks onli...hahaha...TPS n ISC nonit to change sumore...
drag on...u using wat air flow sensor?

mine 455 from v6 twin turbo(or mayb not..tis wat tat fello tell me)....
tat fell giv me free but suddenly his own 1 kong 1 wants it back..

 

[tajulsans]

Just went to KLIMS06 today.. during opis hour lagi.. hahahah.. damn best compared to 03 last time.. more delicious cars and chicks.. Maybe tak sempat to post some pics for u guys to drool.. heheh

 

[drag_on]

Yong_5290
i oso use 92 AFS..some ppl said 92 and v6 kinda same...PPL TALK lah...eyh Yong....what injector u use 91' or 92'?
partyJOE
yup got the TPS and also new ISC...So bout the TB is my luck lah get cheap..
hehe think gonna get another 1 for fren if there is more..

tajulsans
last saturday i also go to KLIMS06 afterward...but not much lah...BMW Volkswagen SAAB..more big company don't have....some ppl said our KLIMS06 don't have the standard of international motoshows organization..so bigs company pull out from our KLIMS06...but tajulsans...its true the sight over there is very very nice :angel_smile: NICE MODELS hua hua especially NISMO mOdeLs....hehe quite kinky...better u guys go lah...

 

[alvin24]

ary4145,
Interested in BOT, lemme know... I got full package turbo kit to let go. =Þ Expendature less than 4k including installation. Satisfaction guaranteed.

Herbie,
The more important part would be the brake pad u use... =Þ