all 4g93 na owners out there!!!!!!

[DanzEterna]

owh ok...but my friend bought a proton putra year 97 with MMC ecu and got speed cut because of japan regulation which is all production car must limit their speed to 180km/h...so i thought might be the same goes to sgti with MMC ecu,maybe proton has removed the speedcut...

maybe the ecu had been changed with a halfcut one....
btw emange is not compatible with siemens ecu.

 

[joe_mirage]

yeah. only halfcut form japan got speedcut :)

 

[xx15xx]

Thank you for all your kind replies.

I hv tested rev no cut Reached 7 but 180 km/h take century to climb further. I tested once when reached 180 km/h (at midnight) than likely to go further more but it sound turbo "blizz" than drop to 175 - 179 km/h and when reached 180 km/h and above than again "blizz"....

Any expect can please help? My ECU number is 0450 4g93 1.8 APM Auto Electrics Sdn Bhd????

Izit my gear box prob or some where is wrong?

Thank you

Regards

 

[jason4883]

Nah... was wondering only.. thought u want extra 20hp out of the emanage.

Don't think they sell SAFC2 anymore. But you can get a good 2nd hand deal tho. Depends, I believe AFC NEO and Emanage will b give more satisfying results. Nope. SAFC cant remove speed cut. Apex'i RSM and Pivot Speed Meter V can do that job. Pivot is a cheaper solution to it.

I wish that too...by Emanage itself can pull out 20-25hp extra. :)

So in AFC NEO vs Emanage case, which is better? Mind to enlighten me dear forumers?

Meaning after I install the piggyback (AFC / Emanage), I still have to add the Apex'i RSM or Pivot Speed Meter V in order to remove the speed cut? But first of all, how can we verify the ECU comes with speed cut or not? By looking at its batch number is one way.

 

[mizi0604]

I wish that too...by Emanage itself can pull out 20-25hp extra. :)

So in AFC NEO vs Emanage case, which is better? Mind to enlighten me dear forumers?

Meaning after I install the piggyback (AFC / Emanage), I still have to add the Apex'i RSM or Pivot Speed Meter V in order to remove the speed cut? But first of all, how can we verify the ECU comes with speed cut or not? By looking at its batch number is one way.

Emanage is better bcoz can setting more than AFC NEO...AFC NEO is better bcoz got blink blink,more stylo...

Emanage can remove the speed cut.

 

[zeckry zorano]

me also ma

can hit 200km/h easily,
mods standard only,
only install apexi air filter,new plugs and extractor only..
coming soon adding more parts inside the heart..vroooom
need help here act.im searching for blue cable plug tricore for my gti.
Where can i find 'em?

thanks

 

[DanzEterna]

go for ngk blue ones la bro.

 

[skytech]

All sifu,

Mitsu 1.8 dohc ECU 6123 fit with what airflow box number ?

Izit others then mivec ecu, ecu 6123 is the only ecu which can change a small chip inside the box to reach rpm 9k ?

How to know the ecu is really 6123 if the sticker outside the box already missing ?

tq tq.

 

[zeckry zorano]

im driving gti with 4g93p heart + mmc ecu..so far not bad with the startingla...easily reach 200+km/p,any suggestion in basic mod???

---------- Post added at 12:44 AM ---------- 6 hour anti-bump limit - Previous post was at 12:37 AM ----------

go for ngk blue ones la bro.

got any lubang selling cheap hah???:

 

[edwardgth]

Hi guys,

I need some advice in my 93 single cam mods. So far, I've changed to drop in filter, 2" extractor, pipes & bullet but still running on stock twin tip exhaust with 2" inlet & SAFC 1. Tried using 240cc injectors from sgti and was able to feel the difference from the stock 180cc injectors but the fc is horrible. The engine is able to produce decent "pull" within 3-4.8k rpm but feels restricted after 5k on 3rd gear onwards. Can you guys please advise what I should do next to remove this restrictions for it to rev up till 7k?

Thanks in advance.
Edward

 

[AmpBossLady]

hello...

new here...

before i have a 1300 carb engine on my lancer but unfortunately the engine broke down.. so i decide to put a 4g93 1800 dohc engine on it...

not really an expert about cars but i really wanted to learn more about it..

any suggestion for upgrades and stuff..

:)

Thanks!

 

[Shinjite]

Hi guys,

I need some advice in my 93 single cam mods. So far, I've changed to drop in filter, 2" extractor, pipes & bullet but still running on stock twin tip exhaust with 2" inlet & SAFC 1. Tried using 240cc injectors from sgti and was able to feel the difference from the stock 180cc injectors but the fc is horrible. The engine is able to produce decent "pull" within 3-4.8k rpm but feels restricted after 5k on 3rd gear onwards. Can you guys please advise what I should do next to remove this restrictions for it to rev up till 7k?

Thanks in advance.
Edward

Hi did you go for a dyno?

 

[virqai]

hello...

new here...

before i have a 1300 carb engine on my lancer but unfortunately the engine broke down.. so i decide to put a 4g93 1800 dohc engine on it...

not really an expert about cars but i really wanted to learn more about it..

any suggestion for upgrades and stuff..

:)

Thanks!

if u seriusssly got lancer mx body(not proton)....jump to vtec B18c gsr bro..or have more budged catch type R one....can put vtec engine cun-cun,coz same chasis like wira right?.

 

[fastclubman]

joe_mirage,

the putra is running 288/288 cams only. but the power figure is a little higher than that now...

 

[joe_mirage]

the legendary SP owner is here! hehe. hi bro mugil. how's germany?

 

[siputmagic]

Joe_mirage,
U use what type of piggyback in your satria? Original ECU is what?

Thanks.

Anyway, nice blog you have...

 

[fastclubman]

Germany is OK la...nothing beats being in Malaysia!

 

[StealthSpeed]

mine is 4g93p but very slow lah..no tune up..:slug: haizzz...but like 2 see all nice mods car...me no money tuning car lor..huhu..peace! :-)

 

[Fyi_r]

Hi...saya ingin mencari head complete 4g93 sohc yg terbalik... Untuk waja.. Pm saya kalau ada..terima kaseh..

 

[major]

hi.does anyone know head gasket size (mm) for use with Mivec piston on satria gti (std 10.5:1) to get final compression 11.0 and 11.5 ???????
(I am using prog. ecu 272cams,throttle,4-1, etc) I just want to know the question above. THANKS all..sorry if wrong post