What happens if the fibre inside a aftermarket Bullet terbakar/habis?

nitrus

2,000 RPM
Senior Member
Nov 14, 2005
2,895
35
1,648
-----------------------
 
Last edited:

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
fibre habis, ur exhaust will be noisy lo... FC and power wont be affected much la... dont worry....

to check if ur tabung still got fibre or not, use coin and knock on the tabung.... if the sound is solid type, means still got fibre lo.... if the sound like knocking on empty tin, means fibre gone liao....
 

nitrus

2,000 RPM
Senior Member
Thread starter
Nov 14, 2005
2,895
35
1,648
-----------------------------
 
Last edited:

nitrus

2,000 RPM
Senior Member
Thread starter
Nov 14, 2005
2,895
35
1,648
-----------------------------
 
Last edited:

gohkokeng

2,000 RPM
Senior Member
Feb 21, 2006
2,443
4
1,638
maybe Nitrus already lost confident to people because of LAI EXHAUST......

he wants the honest of the honest replies......lol
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
hahaha.... tak faham apa lu orang kata la...
what honest of the honest replies pulak??.... lolz...

wait for some holyman come in and reply u lar... hahaha....
 

nitrus

2,000 RPM
Senior Member
Thread starter
Nov 14, 2005
2,895
35
1,648
-----------------------------
 
Last edited:

Fluffy

3,000 RPM
Senior Member
May 1, 2005
3,870
3
3,138
>>klang<<
yeah...got nothing to do with ur FC.dont worry..but u might get a lil better flow la.haha coz less restriction.:_:
 

PocketRocket

'(00) Mod'er
Helmet Clan
Senior Member
Nov 28, 2004
11,164
953
3,213
Up Yours
having a party?..hehe...nola...the fibre in the bullet wont affect ur performance...just louder tone like whats happening now.anyways,i went to lai before n got a aftermarket twin pipe for my satria...till now its working fine cuz when i bought it,it came out fresh from the plastic bag wrapped...and seeing the business he's running in there n all the explainations...thats was the last time i went there...kinda sloppy work n when he explains,he assumes i dont know anything about exhausts n start crapping....


my 2 kupang...
 

nitrus

2,000 RPM
Senior Member
Thread starter
Nov 14, 2005
2,895
35
1,648
-----------------------------
 
Last edited:

nitrus

2,000 RPM
Senior Member
Thread starter
Nov 14, 2005
2,895
35
1,648
Lolz.. yeah la of coz gohkokeng.

But anyway guys, DONT EVER GO TO LAI EXHAUST CENTRE .. Situated nearby Taman Bahagia station punya. His charges are SKY HIGH n he'll do his best to cheat u in any way possible.

I have asked him the pricing for many of his stuffs before, the price he quoted me is RIDICULOUS and he always claim that "oh, this thing price went up ady la in market now" ... Bullshit.

Last time when i was still a newbie to mods, my first mod was the extractor. He charged me RM180 for the extractor, WITHOUT THE FLEXIPIPE. Bastard. And a ciplak bullet for RM80.

After a few months i went back to Lai and asked him why the muffler now louder ady? He said the bullet's fibre is burnt ady. I say "so how?" ... u know what he answered? ... He said in mandarin "This kind of things... you know la... You buy at this kind of price, this is what u will get..." . Bloody MOFO. The most ironic part is he is the one who sold me the bullet. I sound him also he diam only. Cheh.

Even a cold air intake pipe also he wanted to charge me RM200 last time when i asked about it. Luckily i didn't do it.

Lai-Cibai is a major fucker wey. DONT EVER GO TO LAI EXHAUST CENTRE
 
Last edited:

Lopot

Known Member
Senior Member
Dec 24, 2004
396
2
3,018
K.L
Visit site
OK..Ok...we've got your point. Don't need to mention again and again about him. So regarding your bullet, if the fiber is burn up already, just replace it or if you don't mind of the noise, keep it.
 

gohkokeng

2,000 RPM
Senior Member
Feb 21, 2006
2,443
4
1,638
when i 1st get my car......i come 'here' this forum to ask and learn from sifu2.

then the more i learn the more understanding about modifications, after that start mod a little by little some even DIY.

I also kasi orang cheated b4 also..... i make it long story to summary.

2 lanes cornering i and another Honda Civic rushing the Orange light then i am on left lane and he's on right lane.....he cornering until makan 1/2 my lane (cibai noob driver) then i shocked and quickly turn left and TERNAIK benteng.

Allignment, steering and such all lari liao

went personal shop fix....charge me RM120 for 2 fucking adjustable chambers and do wheel balancing to check RIM got dent or not and allignment. Afterall still not satisfied. Steering and alignment do not goes straight line.....so hai said the ROAD not straight ma....

Decided to take back Proton Service Factory, the uncle (Ah Soon) said that shop simply do and cheat money 1.....and he said he do not dare to refix for me cause he changed the 1 chamber to 2 adjustable chambers.

Then i speed back to the fucker shop and take back my ORIGINAL chamber, after that everything back to normal paid Proton Factory about RM50 for everything.

and my RM120 bought 2 fucking adjustable chambers......and now still at home, brandnew 1......who wants? i sell both RM80 or 1 RM40
 
Last edited:

Random Post Every 5 Minutes

Hi Everyone,

I have a very big question. I am planning to do a D.I.Y on an engine conversion (just as a hobby), so any help from experienced mechanics or anyone who has done this conversion before would be at great help! I am very serious here.

Okay. Lets just say, i have got:

1) Evo2/3 full harness wiring,
2) Evo2/3 complete engine with mounts,
3) Evo2/3 Air flow meter (MAF) and ECU,
4) But using my 4G93 Gearbox.

Is this all i need? I dont have a complete half cut. I am just worried...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience