VR4/EVO Stroker Tech

[proPIPING]

sumthing to share with you guys playing with this stroker motor.. take a look at all the attachment below..i've been keeping this in my personal collection for quite sum time

same laa...i also keep that article...he3

 

[kroolada]

master pulak, curi spectre kang :P

would agree here, just take the 100mm crank from 4g64 normal one n plonk it into ur block , done

alo jinkl , yesterday really ar u with uncle zainal at millenium. very shy la u he3.

 

[HDTmotorsport]

alo jinkl , yesterday really ar u with uncle zainal at millenium. very shy la u he3.

hehehehhe
he so shy..
wanna buy burger also need some1 to accompany him coz too many aweks kilang
kekekekekekek

 

[jinkl]

kroolada : where got bro, low profileeeee :P

mell_amir: biasa la , not handsome like you mar

 

[danish]

yes it's posibble but you need to make a brass bushing at the small end bcoz the diesel piston pin is bigger than evo/fairlady piston...

So,bro proPIPING,
If the above setup is:
4D68 crank
4D68 con-rod
Fairlady piston

This is considered 2.2L stroker is it?

 

[goo_61t]

yeap this is a 2.2 ltr stroker

Bump: yeap this is a 2.2 ltr stroker

 

[HDTmotorsport]

yeap this is a 2.2 ltr stroker

Bump: yeap this is a 2.2 ltr stroker

so u also 2.2 stroker??
kekekekkekeke

 

[goo_61t]

wahahahaha..me no engine already wahahahahaha

 

[jinkl]

so u also 2.2 stroker??
kekekekkekeke

i tell u later

 

[spuzzle]

tumpang tanya,

2.2 stroker/ 7 bolts need much modification into vr4 block?

 

[vteckiller]

in potong kereta in kepong i saw 6bolt 100mm crank today and heaps of 7bolt too...

Bump: in potong kereta in kepong i saw 6bolt 100mm crank today and heaps of 7bolt too...

 

[n/a_tune]

in potong kereta in kepong i saw 6bolt 100mm crank today and heaps of 7bolt too...

Bump: in potong kereta in kepong i saw 6bolt 100mm crank today and heaps of 7bolt too...

6bolt 100mm crank?? u mean 4g64 with 6bolt crank??:rolleyes::rolleyes:

 

[proPIPING]

super rare item.....

 

[jinkl]

hehehe super rare, i see many ready to jump hehehe

 

[3rd GearPerformance House]

in sydney i got galant engine 4 piston 3.0 liter.Many ppl here put twin cam head and run 45psi boost with E85.

Bump: 4G64 block 6 bolt in sydney plenty..brapa banyak mau.RB30 engine lots la bro here.4D Diesel block 3liter already run 60psi with methanol.