Taiwan brand front camber kit. Please help.

[Sil80-13]

Hi bros,

I am using front camber kit GAB made in Taiwan. The problem now is right side got sound & the sound should comes from the bush & when I lowered my car lower, the sound getting louder & louder & sound like "ngek ngek ngek" & it's noisy. Anyone bro facing this problem? This is what we call made in Taiwan.

1. Can I use anti-rust to spray on the 2 big bush & will the sound went off?

Or any bro using the same product & face the same problem? Any solution?

 

[arrowhead]

anti rust on the bush to remove the sound? no it wont work. if its the bush that is making noise, the only solution is replacement..

 

[^pomen_GTR^]

if tok tok or ktak ktak sound have to replace back faulty bushing..

if just ngek2 sound can remedy with some greasing job to that contact area of the bushes...

 

[Sil80-13]

if tok tok or ktak ktak sound have to replace back faulty bushing..

if just ngek2 sound can remedy with some greasing job to that contact area of the bushes...

Ya. This is what my foreman told me. Ask to put some grease on the bushes area. Will try it out & update you guys...

 

[Sil80-13]

Updates:

I have remove the Taiwan GAB front camber kit. Actually the "ngek ngek" sound is because the camber kit 2 side at the end touch the inner body. When compare with stock EG camber, it's different at the 2 end where stock EG camber is round L shape whereas Taiwan Gab camber is straight at the end 2 side. So my foreman just cut the both end side abit & it will not touch the body.

Problem solved. Hope this help to who face the same problem as mine...