Rebore Campro Block and high comp pistons.

Im Not Fancy

Junior Member
Thread starter
Apr 9, 2015
12
0
501
Melaka
not sure...quite hard to diagnose that online :listen:

Stupid compressor died.. As for the RPM drops, its resolved. Because the ECU got reset and reset. (I disconnected the battery multiple times because it won't start at times)


Now 500km run-in, looking good. Car has low-end power. I like it. But still not enough "oomph".
 

Rafale

Known Member
Senior Member
Dec 10, 2006
73
7
1,508
Selangor KLIA
I believe there's already stroker kits manufactured by Obuddy.. 90 & 92mm stroker vs 88mm stock. Coupled with 2mm oversize bore will increase the displacement to 1758cc from stock 1596cc, 162cc difference.

This is the link: https://goo.gl/v3XyUv
 

Random Post Every 5 Minutes

Hi guys and hear my story out.*
Need your opinion. After a bunch of other upgrades i decided it was time to mod my suspension.*

My car is a proton inspira btw.*

Initially 10 months back i started to change the spring to proton R3 springs. It was great, good compromise between comfort and handling. (level was 3 fingers loose back and 2 1/2 finger front)*

After a while my driving improved and started to feel that the suspension could not handle fast corners.*

Thats when i change my...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience