DIY LED Volt Monitor for my DIY VS

[kruger]

Some of the forumer asked me about my diy led volt monitor for my vs. So here is the PCB layout and also the diagram for you to do the diy... ;) I believed sharing is good... Don't you think so??? :D

Go to my web site at Kruger's Gallery and select the pcb link and the password is zth-forum exclusive to zth diy forumer only... kekeke ;)

 

[khguan]

nice one.. but only 4 LED?? 1 LED means howmany volt??

anyway.. de PCB layout is look from above or below??? i long time din make PCB liao.. hehe... my ferric chloride also my mum throw away liao...

 

[howiechoo]

the board use 4 led to measure the coltage in the VS ?? is that first LED means 3 volt, second mean 6volt till 4 led means 12v ??

 

[kruger]

howiechoo: the board uses 3 led to measure the voltage. red is under 11.5v green 11.6-15.5v and yellow or last led is 15.6 up to 15.8v if not mistaken and 16v considered all the electrical inside your car liaow edi...

khguan: top layer pcb is for refer only. the bottom layer, u just need to copy it and print it out. no need any modification coz the size of the board is small only. print using laser printer on to the photo paper and iron it on the pcb board la... the rest you know how la....

 

[ftzone]

kewl stuff... yet again from kruger... bro can make one for me ah? i pay u la... lazy wanna diy... hehehe

 

[kruger]

kewl stuff... yet again from kruger... bro can make one for me ah? i pay u la... lazy wanna diy... hehehe

easy la bro... don't know when to make la, coz right know been quite busy ler... y u want 2 use this diy??? u got more high tech stuff ma.... ;) kekeke :D

 

[marvellous]

Some of the forumer asked me about my diy led volt monitor for my vs. So here is the PCB layout and also the diagram for you to do the diy... ;) I believed sharing is good... Don't you think so??? :D

Go to my web site at Kruger's Gallery and select the pcb link and the password is zth-forum exclusive to zth diy forumer only... kekeke ;)

bro...ur web site cant open la bro...can u send how to DIY the volt meter in my mail... [email protected]

 

[kruger]

bro...ur web site cant open la bro...can u send how to DIY the volt meter in my mail... [email protected]

can la... everyday i check ma... :p just click on my signature la... btw you can search how to diy the pcb on the net la... then use my pcb diagram to do the board... try la...

 

[kruger]

bro...ur web site cant open la bro...can u send how to DIY the volt meter in my mail... [email protected]

don't forget the pasword is zth-forum ok? ;)

 

[ftzone]

tak reti nak buat la... me not electrician.. lol
buat casing cun la..

like this one..

 

[kruger]

tak reti nak buat la... me not electrician.. lol
buat casing cun la..

like this one..

aiyoooo.... kekeke have to resource the box la pulak... :)

 

[kruger]

can you find that kind of box or not? if can contact me ler... ;)