DIY - decals -

[partyJOE]

spray soap water on the surface....

n stick the sticker...

 

[partyJOE]

after adjusting the sticker...
let it dry awhile n remove the masking tape...

wallah ...finish...
save me 5bucks 4 dis sticker....

 

[alex_wky]

WOW!!!
nice guide, Joe. maybe the mods should consider in pinning this thread/sticker guide. ;)

 

[simplythebest]

I think I know how to do it. Actually normal A4 printer also can, it all depending on the size of sticker that you want actually. :D

Wahahhahahahaa, nice using the masking type. :D

I think the hardest part is the cutting.

Joe: You didn't use the steel ruler to cut? How did you cut so perfectly without making a single mistake?

For stickers like ADVAN, don't need good printer, you just need the outline to cut.

 

[partyJOE]

I think I know how to do it. Actually normal A4 printer also can, it all depending on the size of sticker that you want actually. :D

Wahahhahahahaa, nice using the masking type. :D

I think the hardest part is the cutting.

Joe: You didn't use the steel ruler to cut? How did you cut so perfectly without making a single mistake?

For stickers like ADVAN, don't need good printer, you just need the outline to cut.

ya u can even use A4 printers for small stickers ...
but i need a A3 for windscreen sticker cos dat was bigger...

so its adviseable to do simple logos for easier cutting...
'momo' is the easiest... cut it in 2mins only...

but again it all depends on how u cut them... just take yr time, it will all be fine...
happy trying.. it will be fun...

p/s... gonna use plotter for my next project.... waitup 4 'PROJECT BODY STRIP'..

 

[satria4g13p]

good

good, i know how to do ald...thanks alot

 

[simplythebest]

ya u can even use A4 printers for small stickers ...
but i need a A3 for windscreen sticker cos dat was bigger...

so its adviseable to do simple logos for easier cutting...
'momo' is the easiest... cut it in 2mins only...

but again it all depends on how u cut them... just take yr time, it will all be fine...
happy trying.. it will be fun...

p/s... gonna use plotter for my next project.... waitup 4 'PROJECT BODY STRIP'..

Don't forget to post here after finishing the project ok. :D

I have a question, all the stickers you cut them following the outline only? Is there any tips? I doubt I can cut that consistent.

 

[abeyus]

Very interesting ...

How to mirror the image of the logo??
Can u show me??

did these decals using normal stickers bought from 'brother's'
first i draw the needed logo in my computer..
then i mirror image the logo...
then print it to the required size at the back of the sticker sheet...
then cut them out patiently...
once its ready...
stick em up...

pls comment

windscreen decal...

 

[satria4g13p]

aiii

i salah cut lar......my lovely sticker gone liau....coz i was printing out the sticker of the brand call pipercross, ai...have to redo again, maybe other name lar.....
not free to diy now.....got project to do...

 

[stalkerrox]

from brothers...
balck/silver.. rm12 each
CF... rm15
abt 1m long each... enuff 2 do yr whole car....
still alot spare for other stickers...

which brothers you bought it from?
what is the sticker called..? because i ask brothers in port klang.. they like damn
blur.. -.-"

 

[partyJOE]

which brothers you bought it from?
what is the sticker called..? because i ask brothers in port klang.. they like damn
blur.. -.-"

i bought at brothers batu caves..
this vynil stickers can get anywhr...
those sticker shops in pandan indah also...
more colors n choices...but abit far..malas...hehehe

 

[stalkerrox]

i bought at brothers batu caves..
this vynil stickers can get anywhr...
those sticker shops in pandan indah also...
more colors n choices...but abit far..malas...hehehe

okie =)
thanks bro.. :D

 

[trxx]

how to do those transparent sticker on side doors? what should i buy. can plz provide step by step guide?
thanks

 

[partyJOE]

how to do those transparent sticker on side doors? what should i buy. can plz provide step by step guide?
thanks

i din use any transparent sticker... i use normal black vynil sticker..
steps r as u c for d 'ADVAN' sticker...

 

[ijoe]

nice job man...damm cun stiker kat keter u...cam real..cam beli kat kedai tu...

cam mana ko dapat logo tu..scan logo tu dulu ke ? tulisan tu plak..cam mana ko boleh dapat exact cam real tu...

 

[partyJOE]

nice job man...damm cun stiker kat keter u...cam real..cam beli kat kedai tu...

cam mana ko dapat logo tu..scan logo tu dulu ke ? tulisan tu plak..cam mana ko boleh dapat exact cam real tu...

tq tq... looks real ha... i search 4 logo images in the net... print them out..
then draw back as exact as possible in computer... hehe ... if draw freeehand tak jadi 1..
maybe i'll brief mur on our next TT...(",)

 

[bizkuzz]

hi all ZTH members.
i'm a newbie here, sila tunjuk ajar.
learnt a lot from other forum topic and got interested with this one.
before i proceed, i would like to say, joe, it's really awesome!
and thanx for providing the instruction here.
will try one myself one of these days.
still figuring what to print.
hehe
:)

 

[partyJOE]

hi all ZTH members.
i'm a newbie here, sila tunjuk ajar.
learnt a lot from other forum topic and got interested with this one.
before i proceed, i would like to say, joe, it's really awesome!
and thanx for providing the instruction here.
will try one myself one of these days.
still figuring what to print.
hehe
:)

thx alot yo...

 

[FoarGeez]

awesome!

i did tried b4.. but manually.. i cut the stickers bout roughly d size i wan.. juz say 8 by 3 inch.. then i stick masking tape, n start drawing n measuring... juz a 'momo' took me almost half n hour....huaaaa :frown: traditional way.... dats juz geometric shape... if organic like 'recaro'... haih so many tries n errors.. sumore look like pirated..end up tearing them of :thumpdown

Need abit of yr help la brother joe.. n haf 2 admit dat the NFSU is damn cun! simple n creative. how la u got the patience... i rememba last time, i bleed my fingers n had hand cramps..

So juz few questions:

- u knoe where can get the 'transparent' stickers? u knoe like u, u used masking tape 2 transfer yr finished vinyl 2 d car.. but usually custom stickers shop using this.. so dat can stick more accurately.. its like a thin sticky film.. veri hard 2 find those la.. more or less like food wrapping plastic dat wan..hope u get wat i mean

- bout printer, is it ok 2 use normal A4 printer? would d sticker 'crumple' abit since u r printing it the back of it.. cuz those stickers r been rolled frontwards from shops.

- haf u tried stick yr stickers in engine bay? heatproof tak? if not hafto go Tom's Stickers there buy liao.. mahal siot..

- And lastly wat software u used? Photoshop?

Cuz im actually tryin 2 do d same project like u... if im not mistaken u r doin the dodge viper stripes style ryte i assume?
Where else im trying 2 do d side wan.. like Satria R3 but ade garis putus2.. from headlight 2 tail light hehe... :rolleyes:
flames n tribals r to complicated..so juz stick 2 simplicity

 

[xtracooljustin]

Very interesting ...

How to mirror the image of the logo??
Can u show me??

use photoshop n mirror.