Can anyone please teach me....

[PocketRocket]

How to remove headlight bulbs to replace new ones....?
i changed to philips crystal vision and i got these michiba's...i wanna see for myself,
which is brighter....
can tell me step by step..? ima veli de 'tau kei' in this ler :(

 

[simefly]

Here you go Step by step

1) Pop your bonnet open.. Hahaha just kidding
2) Look directly behind your headlamps and you will see a socket connecting directly at the middle of the round rubber piece.
3) Press the clip and pull off the socket
4) Then remove the round rubber piece (tip: you can pull the ear/extending flap of the rubber piece). Just make sure you don't tear the rubber as you do not want to rear goldfish in it...)
5) there will be two sort of like bunny clips. It feels abit 'springy' Press it towards the front of the headlamp and pull it towards the side. Do the same for the other clip as well.
6) then hold the leg of the bulb and pull it out gently. DO NOT TOUCH the glass bit of the bulb.

Repeat steps 6,5,4,3,2,1 when you put it back. then get on to the next headlamp. Follow steps 1,2,3,4,5,6,6,5,4,3,2,1... you will be fine!

Happy removing then!

 

[arrowhead]

LOLx, sai em sai ar until open a thread?

 

[khguan]

here DIY mah... i'm sure many ppl wanto learn hot to do it.. including me!! hehe :D

 

[simefly]

Aiyo khguan, you can do this with your eyes close la..... hehehe

 

[khguan]

oh really? i no experience mah.. keke...

 

[drexchan]

i never had any experience before I succesfully changed my bulbs for the first time, too.

^ the above statement has been edited. So you understand what i mean now?

 

[PocketRocket]

wahh...simefly...tqtq...
btw..when are you joining us for convoy??

 

[simefly]

Aiyo uncle drex and guan... don't la be so modest... hehehe must be too technical until the easy easy stuff forgot how to do liao hahahaha

PocketRocket: Now i full time david blaine... hehehe Been very busy with work lately and really no time to even move around much la in weekdays. Are you all having a TT or convoy tonight?

 

[khguan]

haha... get used to hi-tech DIYs... but duno bout low-tech DIYs liao... kekekek :D

 

[drexchan]

previous post edited. read properly

 

[PocketRocket]

hmm...i cant seem to find any 'clip'...but when i took my car to CV audio...peter changed it like damn easy oni...i feel so useless.. :(

yea...tonite small TT convoy..come lar...aiyo

 

[khguan]

so at last u din DIY?? hahah.. so did u watch how de guy do it?? how much he charged u?

 

[simefly]

yah man.... did you watch and learn??? how much did he charge you for it??? Gosh you should have told me, then if i join TT tonight i can help you change la...

 

[PocketRocket]

i cant see...i wanted to peep... lolzz...but i cant figure out any clip securing the bulb...

peter do FOC lerr...fren fren wz him,nuffin wan..all this small tasks..but i really want to learn lorr....so simefly coming anot tonight?

 

[simefly]

same place same time??? i can try to join for a short while la... but i have to run some errands fers... hehehe

 

[PocketRocket]

ok dude....see u there...den i show u my michiba's..kekeke

 

[rayz85]

Here you go Step by step

1) Pop your bonnet open.. Hahaha just kidding
2) Look directly behind your headlamps and you will see a socket connecting directly at the middle of the round rubber piece.
3) Press the clip and pull off the socket
4) Then remove the round rubber piece (tip: you can pull the ear/extending flap of the rubber piece). Just make sure you don't tear the rubber as you do not want to rear goldfish in it...)
5) there will be two sort of like bunny clips. It feels abit 'springy' Press it towards the front of the headlamp and pull it towards the side. Do the same for the other clip as well.
6) then hold the leg of the bulb and pull it out gently. DO NOT TOUCH the glass bit of the bulb.

Repeat steps 6,5,4,3,2,1 when you put it back. then get on to the next headlamp. Follow steps 1,2,3,4,5,6,6,5,4,3,2,1... you will be fine!

Happy removing then!

if touch da glass bit of the bulb den how ark :(

 

[PocketRocket]

MY 1ST DIY IS NOT ON MY CAR.....hahahahahaha

feel dam good,achievement~!! (^.^)v

 

[khguan]

if touch da glass bit of the bulb den how ark

use a tissue to wipe it clean....

when u touch de glass... ur fingers wil left some oil on the glass.. when de bulbs light up... it will be heated unevenly.... n cool down unevenly.. so this may damage the glass... by breaking.....