svt + twin coil distrubuter...

cuscostrutbrace

500 RPM
Senior Member
Jul 10, 2004
987
62
3,028
My current setup:-



7AFE DLI Coil with Built in Igniter...Can use COP also but no enough money to buy lah,hehe

And the 'Brain' is.....


Not yet driven,just started the car...see all the wires are not yet done... :)
 

normality78

3,000 RPM
Senior Member
Nov 14, 2003
3,052
23
5,138
JB
Visit site
cuscostrutbrace ,
Ur 7AFE with DLI Coil, is because ur 7afe is DLI version rite? Mine was with distributor, if were to convert to DLI coil type, i need to change wiring/ecu and the coil rite?
 

otismummum

500 RPM
Senior Member
Oct 28, 2005
643
12
1,518
can share with me ar... if change all that any different with using plug cable??:hmmmm:
 

normality78

3,000 RPM
Senior Member
Nov 14, 2003
3,052
23
5,138
JB
Visit site
Frm the pics, the plug cable is very different
 

seg 7138

Known Member
Senior Member
Thread starter
Oct 13, 2008
127
1
1,518
this COP (Coil On Plug) DLI system like nissan cefiro? so cute.....
 

cuscostrutbrace

500 RPM
Senior Member
Jul 10, 2004
987
62
3,028
cuscostrutbrace ,
Ur 7AFE with DLI Coil, is because ur 7afe is DLI version rite? Mine was with distributor, if were to convert to DLI coil type, i need to change wiring/ecu and the coil rite?
The coil is from DLI version 7AFE...

I have research some bout this thing,i manage to start the 20v with DLI coil with stock ecu,but it cannot be driven and the ignition timing is way off,it can idle though...but to be safe,the best way is stand alone,or MDI..at least it is proper..
 

normality78

3,000 RPM
Senior Member
Nov 14, 2003
3,052
23
5,138
JB
Visit site
Next, can i achieve it by using E.Ultimate? Or i die die need standalone? Can i leave stock wiring in place when i run standalone? Meaning run another set wiring. Coz im thinking if next time sell car or demod, i can just plug back the stock ecu and go. No need redo wiring
 

cuscostrutbrace

500 RPM
Senior Member
Jul 10, 2004
987
62
3,028
Next, can i achieve it by using E.Ultimate? Or i die die need standalone? Can i leave stock wiring in place when i run standalone? Meaning run another set wiring. Coz im thinking if next time sell car or demod, i can just plug back the stock ecu and go. No need redo wiring
You can try ultimate,no need to do another set of wiring,just make a jumper harness.
 

Random Post Every 5 Minutes

Hi guys,

Im checking out the cost to change the whole bushing and mounting for wira se?

Also much appreciated if could suggest the shop.

I just need normal type, not high end like superpro.

Thanks..
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience