EG overheating, oil temp 100’c and water temp 80-95’c

[Izso]

So reaching 100’c should be normal temp?

oil yes... water no.

 

[Ranjanmax]

very strange, you have the water temp but no oil temps.....
usually na guys go for the oil pressure, followed bu oil temps then water temps

Bro, I got 3 gauges reading for oil temp, water temp and oil pressure..

 

[Ranjanmax]

my previous B16A i set the temps gauge to buzz at the temps below

oil - 130c
water - 97c

n i only achieve that during track days and also hot weather mega traffic jam.

was using an oil cooler as well as a short AVS aluminium radiator

So oil Temp should be about 100 like that?

 

[lsm1991]

eh

So oil Temp should be about 100 like that?

you mentioned the oil temps ka? my god i must be blind. mine in the afternoon in jams can hit almost 100 (OIL)... dont think its an issue

 

[vr2turbo]

So oil Temp should be about 100 like that?

Yup, oil normal temp around 100c, high revs way higher.
If water temp then no, should be around 90c. It also depends where you sensor are fitted taking the temp.....

 

[Ranjanmax]

eh

you mentioned the oil temps ka? my god i must be blind. mine in the afternoon in jams can hit almost 100 (OIL)... dont think its an issue

Haha no worries bro and thanks for the advise

 

[Ranjanmax]

Yup, oil normal temp around 100c, high revs way higher.
If water temp then no, should be around 90c. It also depends where you sensor are fitted taking the temp.....

Noted with thanks bro