K-Tuned “Function Form” Shift Knob
The K-Tuned Billet Shift Knob is the result of quite a bit of customer and racer feedback. We already offer several K-Series shifter upgrades so it was definitely time for us to develop a clean and functional shift knob. The process begins with a solid billet bar of 6061 aluminum, and each knob is machined to final size on a CNC lathe. After the lathe, the blank knobs are sent out for the anodizing process. The black is hard anodized and the silver is a regular anodize. During the final step, each knob is chucked up on a 4-Axis CNC mill to precision cut in the unique grid pattern that was designed to improve shifter grip. This final step is so critical that we actually have a 5% scrap rate. On cable shifter setup we found that a weighted knob can cause shifting problems for some drivers because the neutral return spring has to work harder to pull the shifter back to the center. So instead of going to the heavy side we found a good weight (5.5 oz) that is just enough to allow confident and accurate shifting while still keeping enough weight to help the front to back shifts. Shift knobs are finished in your choice of black or silver with our K-Tuned logo on two sides. On top we engraved our signature “K” logo. A custom made jam nut is included to keep the knob locked in place. This knob is a great way to finish off any shifter setup
Suitable For K Series.
Bakuso Racing Sdn. Bhd.
No.21, Jln PJS 11/24,
Bdr Sunway.
47500 Subang Jaya.
Operation Hours: Mon~Sat 9am~7pm
GPS: Latitude 3.067118, Longitude 101.601951
Click Here For Google MAP Location
Land Mark:
Same row with Kedai Tayar Silverstone Teck Meng, REV PERFORMANCE, Millennium, 2 shops beside SAMURAI RACING.
For serious buyer please Whatsapp or SMS
Desmond 017-396 8567
Email us : [email protected]
Dealing method : Pos/Courier everywhere in
Malaysia including Sabah, Sarawak, Brunei, Indonesia, Thailand, Singapore and all area in Asian.
The K-Tuned Billet Shift Knob is the result of quite a bit of customer and racer feedback. We already offer several K-Series shifter upgrades so it was definitely time for us to develop a clean and functional shift knob. The process begins with a solid billet bar of 6061 aluminum, and each knob is machined to final size on a CNC lathe. After the lathe, the blank knobs are sent out for the anodizing process. The black is hard anodized and the silver is a regular anodize. During the final step, each knob is chucked up on a 4-Axis CNC mill to precision cut in the unique grid pattern that was designed to improve shifter grip. This final step is so critical that we actually have a 5% scrap rate. On cable shifter setup we found that a weighted knob can cause shifting problems for some drivers because the neutral return spring has to work harder to pull the shifter back to the center. So instead of going to the heavy side we found a good weight (5.5 oz) that is just enough to allow confident and accurate shifting while still keeping enough weight to help the front to back shifts. Shift knobs are finished in your choice of black or silver with our K-Tuned logo on two sides. On top we engraved our signature “K” logo. A custom made jam nut is included to keep the knob locked in place. This knob is a great way to finish off any shifter setup
Suitable For K Series.
Bakuso Racing Sdn. Bhd.
No.21, Jln PJS 11/24,
Bdr Sunway.
47500 Subang Jaya.
Operation Hours: Mon~Sat 9am~7pm
GPS: Latitude 3.067118, Longitude 101.601951
Click Here For Google MAP Location
Land Mark:
Same row with Kedai Tayar Silverstone Teck Meng, REV PERFORMANCE, Millennium, 2 shops beside SAMURAI RACING.
For serious buyer please Whatsapp or SMS
Desmond 017-396 8567
Email us : [email protected]
Dealing method : Pos/Courier everywhere in
Malaysia including Sabah, Sarawak, Brunei, Indonesia, Thailand, Singapore and all area in Asian.
Attachments
Last edited:
