WTS NGV Conversion - Imported stuff NOT CHINA

[huakenny]

Hi,

we are doing NGV conversion now at Old Klang road...

we provide Mixer and Sequential type Injection Kit for most of the vehicles...as long as you are running with Gasoline engine. then you can install.

Our Components are from Italy, Argentina and Brazil. It all Stated in the boxes or components itself, see it to believe. Nothing is from China for sure...

Its too many to list...kindly pm me ur car model and i will quoted you based one your budget

price stated above is inclusive installation and it is negotiable for serious buyer.

All Installation must be done at Old Klang road, our shop is located there. Its 5minutes from Midvalley only.

kindly PM, Email [email protected] or SMS 0168417327

Some photos will be upload later.

Thanks for viewing

 

[apai_Ngage]

Mivec engine can? PM me the price

 

[huakenny]

Mivec engine can? PM me the price

Mixer need Sequential kit, if mixer ur car will no power at all.

do let me know ur car model, coz need to know the size of the tank.

thanks

 

[imran74]

bro,
how about Naza Citra 2.0GS, how much?

 

[huakenny]

bro,
how about Naza Citra 2.0GS, how much?

citra 71L tank is rm7200 or 81L tank rm7600 for sequential kit.

price negotitation hv to be done when u visit my shop.

installation takes 3days ans 1st comes 1st serve....need to Q up if too many cars...

just pay us a visit so we can further talk n discuss bout it.

Try not to install Mixer type even the cost is far more cheaper, it will just gv u more troubles n headaches after installed.

cheers

 

[gh05t]

how much for waja(2002) auto 1.6 ..not campro..

 

[huakenny]

how much for waja(2002) auto 1.6 ..not campro..

its bout rm7600 before nego, sequential type with 40L tank x 2unit

 

[DanzEterna]

can install on perdana v6 twin turbo ah?
will it effect the performance?

 

[K_Takuya]

hi bro,

please explain more the difference between mixer and sequential. whats the use of it. what to do/install if want to have same power when using gasoline?

 

[edgeo]

citra 71L tank is rm7200 or 81L tank rm7600 for sequential kit.

price negotitation hv to be done when u visit my shop.

installation takes 3days ans 1st comes 1st serve....need to Q up if too many cars...

just pay us a visit so we can further talk n discuss bout it.

Try not to install Mixer type even the cost is far more cheaper, it will just gv u more troubles n headaches after installed.

cheers

Then u should not advertise ur mixer type if u say it's not good...better u explain personally on what will be the effects on using gas to those who innitially budget for mixer type rather than scaring them with rumors...pls don't take advantage on people who already suffer

 

[huakenny]

can install on perdana v6 twin turbo ah?
will it effect the performance?

can...but must use sequential type...otherwise ur car running lean when turbo kick in...sequential type performance reduce 5-10%....

 

[huakenny]

Then u should not advertise ur mixer type if u say it's not good...better u explain personally on what will be the effects on using gas to those who innitially budget for mixer type rather than scaring them with rumors...pls don't take advantage on people who already suffer

bro,

u not really understand the true story befor eu flame me...

mixer is not recommended for efi engine, its good for carburetor engine.

efi install mizer will gv negative effects is not a rumors. let me explain.....

efi engine equipped with ECU for its operation, injection timing, ignition timing....etc etc

when u put in mixer type to EFI, how does mixer communicates wit ur car ECU? its got no ECU....injection and ignition timing..etc all will be mesh up

Why sequential? sequential is design for EFI engine use. it does come with one ECU, that ecu is tap to ur car ecu to get the necessary signals. all timings are based on ur car ecu signals...so it is very accurate and problems free.

feel free to ask me if got anything, im not scaring or gv any rumors...u can ask around before install at any shops..

thanks

 

[huakenny]

hi bro,

please explain more the difference between mixer and sequential. whats the use of it. what to do/install if want to have same power when using gasoline?

mixer designed for carburetor engine use.

sequential designed for efi engine use.

if ur car is carb, u can only install mixer type...manually tune


sequential type, it is designed for efi engine use. tune by laptop.


some efi engine put in mixer type because it the cost is bout half of the sequential type. but in long run, it will gv u more harms.

why?
mizer is manually tune without any controls from ecu...but ur car is EFI, so how ur ecu communicating with NGV when u switch from gasoline to gas? all signals will be mess up and causing ur ride to loss power.

conclusion, if ur car is efi. then u must install sequential type to minimize the power loss.


cheers

 

[K_Takuya]

thanks bro...will remember that..

 

[edgeo]

bro,

u not really understand the true story befor eu flame me...

mixer is not recommended for efi engine, its good for carburetor engine.

efi install mizer will gv negative effects is not a rumors. let me explain.....

efi engine equipped with ECU for its operation, injection timing, ignition timing....etc etc

when u put in mixer type to EFI, how does mixer communicates wit ur car ECU? its got no ECU....injection and ignition timing..etc all will be mesh up

Why sequential? sequential is design for EFI engine use. it does come with one ECU, that ecu is tap to ur car ecu to get the necessary signals. all timings are based on ur car ecu signals...so it is very accurate and problems free.

feel free to ask me if got anything, im not scaring or gv any rumors...u can ask around before install at any shops..

thanks

Well, I'm not trying to disturb ur ad, just want u to be fair to those who cannot affort for sequential type, u may hv ur knowledge in NGV and so do I as I'm already 7 years in natural gas supply company who directly involved in NG conversion, NGV installation, NGV station, etc....,

In-fact, all our company car and 75% of the company staff already convert their car to NGV, I also hv been using mixer type to my toyota blacktop 4 throther engine for almost 1 year plus without any problem. From my experience, mixer type CAN be use on injection engine without any hassle as good as sequential type

 

[huakenny]

Well, I'm not trying to disturb ur ad, just want u to be fair to those who cannot affort for sequential type, u may hv ur knowledge in NGV and so do I as I'm already 7 years in natural gas supply company who directly involved in NG conversion, NGV installation, NGV station, etc....,

In-fact, all our company car and 75% of the company staff already convert their car to NGV, I also hv been using mixer type to my toyota blacktop 4 throther engine for almost 1 year plus without any problem. From my experience, mixer type CAN be use on injection engine without any hassle as good as sequential type

bro,

not going to compare knowledges.....im just telling truth.

if any of EFI car owners wish to use mixer type in their ride, can...no problem....that your car...you hv the right to ignore my suggestion/recommendation.

But when problems arise, you blame me or blame urself or blame the NGV Kit?

in mixer type efi engine, since you in ngv...can u tell me how the injection timing works?

cheers...

 

[gohkokeng]

Iswara 1.3 82L how much best price?

 

[huakenny]

Iswara 1.3 82L how much best price?

hi,

price is around rm3800.

if u really interested bout it, then u can come over the shop and we can further discuss bout the price.

its at old klang road only.

u can sms me 0168417327

thanks

 

[JJJ]

Bro,

My car is Mazda Astina 323 engine 1.6cc, year 1990. I've tried to install NGV in a workshop, also fully imported kit with a good price. Unfortunately, the
70L tank is too big as this is the only stock they have.

The technician told that my car shouldn't be any problem as it use carb system and it cost me much more cheaper.

Any warranty after the installation? If I am interested, when should I send my car to your workshop?

Thank you... I need your information, I've been checking around 8 workshop already but still no progress.

 

[huakenny]

Bro,

My car is Mazda Astina 323 engine 1.6cc, year 1990. I've tried to install NGV in a workshop, also fully imported kit with a good price. Unfortunately, the
70L tank is too big as this is the only stock they have.

The technician told that my car shouldn't be any problem as it use carb system and it cost me much more cheaper.

Any warranty after the installation? If I am interested, when should I send my car to your workshop?

Thank you... I need your information, I've been checking around 8 workshop already but still no progress.

guess i oledi sms u...one year warranty

install NGV doesnt gv u problem as long as u install the right stuffs to ur car.

if u coming on monday, just sms me before u come...gotta make sure im there.

i hv 40-100L tank...we can try which one u preferred the most.

thanks