Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="MrNismo" data-source="post: 4349112" data-attributes="member: 13">It's not recommended to extend your sump especially on Malaysia roads. You'll have a risky clearance. If the car is only used for racing, yes. Road use, no.You can run a high flow oil pump without sump extension. However, you'll need oil restrictors, especially on the block, so that the head don't get flooded (ie lots of blow-bys) and the sump don't get dry. For turbos, it's not necessary.Walbro pumps are a cheap and good deal but they don't last as the HKS/NISMO 280lph unit does, and there are a lot of fakes out there.Maybe this can be a reference to you since my car has almost the same setup:- HKS oil pump/N1 water pump/Tomei baffle/Tomei oil restrictor- GT-SS/HKS 264cams step2/F-Con V Pro- HKS 280lph fuel pump- HKS GD Pro twin plate clutch- 680cc top feedCar is dynoed with 560awhp with octane booster and 1.6bar of boost with injectors at 95% duty cycle.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Overstrecthed tyres, pros & con ?

elloo all sifus, i'm kinda attracted to overstrecthed tyres but not to the extend of more than 3 sizes up, so any suggestions on 1 that fits to my kelisa & whereabouts for reputable shop in ampang @ cheras if...

how to built 2.2 stroker kit???

any one no how to built 2.2 stroker kit;
piston size???
conrod size???
crank size???
etc:

thanks

Bushing Turbo

Hi people, i'm interested in gathering info about bushing turbos.. my target is around 250-300hp on 1.8 engine (Mazda BPT), 510cc injectors.

Please feel free to suggest turbo models, housings, etc on bushing turbos.