which workshop? mind to share?Stupidcar,
I oso made power steering line, ATF cooler line from that workshop too...
which workshop? mind to share?Stupidcar,
I oso made power steering line, ATF cooler line from that workshop too...
Gas Cooker hose can withstand oil?is it the oil cooler hose ah?
use the conventional gas cooker hose
can kua cos its quite thick, usually used to connect oil catch tank.Gas Cooker hose can withstand oil?
Gas Cooker hose can withstand oil?
I wouldn't use gas hose. It can take the pressure but it's relatively stiff. Those clamps will not be able to clamp down to a tight seal that can survive the pressure. I've tried using before and ATF leaked out from the clamps. Worst case scenario for me the clamped section popped out right because too much pressure.can kua cos its quite thick, usually used to connect oil catch tank.
atf line got pressure too. I am using the petrol tube for efi cars for the oil catch tankcan kua cos its quite thick, usually used to connect oil catch tank.
You just answer my query......I wouldn't use gas hose. It can take the pressure but it's relatively stiff. Those clamps will not be able to clamp down to a tight seal that can survive the pressure. I've tried using before and ATF leaked out from the clamps. Worst case scenario for me the clamped section popped out right because too much pressure.
Don't do it when u are not tracking.Guy, can i fix it to my NA car. Some people advise me no need to install it. Another friends do use it and there is significant temp drop.
Guy, can i fix it to my NA car. Some people advise me no need to install it. Another friends do use it and there is significant temp drop.
Don't do it when u are not tracking.
just go to tracktor/heavy machinenery machine shop...they will do it with small pay..so... anyone done the oil cooler lines? can give info on exactly where and how much it costs?
i just got me a used set and kinda need to redo the lines...
prefer subang/shah alam.... thanks
can gimme exact location? i dunno where these shops are.just go to tracktor/heavy machinenery machine shop...they will do it with small pay..