Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="spyderslr" data-source="post: 1570537" data-attributes="member: 2195">Hi guys,I've just bought an Emanage Ultimate recently to install on my Mivec engine. However, i found out that Emanage Ultimate software does not have the initial vehicle setup for Mivec. All they have are vehicle setups for 4G93, 4G63, 6A n 6G engines which all runs on MAF system. Mivecs on the other hand runs on MAP system. Currently i'm running on a 4AGZE with MAP system for initial vehicle setup temporarily just to get the car started and moving. However, the problem for me now is:1. Check Engine light keeps popping out2. Cant tune the ignition properly3. Error code on the ignition channel 2,3 & 4 keeps emerging4. Rev cuts at 6.5k rpm even when i set my rev cut to 8k rpmI seriusly suspect the error code on the Ignition Channel is now triggering the OEM ecu to safe mode, hence the inability to tune the Ignition Map properly and also for the 6.5k rpm rev cut.So, i'm wondering if anyone out there knows the proper vehicle setup, setting for Mivec MAP system engines or what needs to be done for it to run properly. I seriusly need some help here cause this problem has been giving me quite a headache. I'm not sure if the Emanage Blue and Emanage Ultimate has the same database of vehicle setup. If it is, then maybe i can try use the setup as used by Emanage Blue since i've heard of so many Mivecs running on Emanage Blue. Thanks in advance. Cheerzzz... =)....</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TRD T3 17x7.5jj...
- Started by david tao
- Chassis and Wheels
original Enkei PF09 17x8jj offset +35 5H pcd...
- Started by david tao
- Chassis and Wheels
JB GERMANOIL - GROUP BUYS
- Started by HamburgLube
- Engine and Performance
JB Germanoil for Lexus - Group Buys
- Started by HamburgLube
- Engine and Performance
~panel beating ~touch up paint ~polish/wax
- Started by jeff6126
- Exterior and Body
BMW E90 M4 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC TypeR Bodykit/spoiler
- Started by jeff6126
- Exterior and Body
Toyota hiace re-spray whole body
- Started by jeff6126
- Exterior and Body
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

harmonic vibration....lighten pulley

Guys, i was offered a full set of lighten pulley yesterday,....but my concern is "harmonic vibration" that can coz a huge RM later in the future....con rod sleeves, crank shaft bearing...etc.

my question ...how true...

Looking for CT9A stock/OEM rotor

cancel....

question : installation blitz power meter SJ

hi there....

i got a power meter SJ and wondering is there anyone out there knows hot to install this thing... i bought this secondhand but there is no manual for it... i've tried the "www" but there is only...

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

original rare Rays Volk Racing TRD T3 17x7.5jj...

original Enkei PF09 17x8jj offset +35 5H pcd...

JB GERMANOIL - GROUP BUYS

JB Germanoil for Lexus - Group Buys

~panel beating ~touch up paint ~polish/wax

BMW E90 M4 Mperformance front skirt lip

Honda Civic FC TypeR Bodykit/spoiler

Toyota hiace re-spray whole body

Proton Preve R3 body kit

BMW F30 M3 front skirt lip

Posts refresh every 5 minutes

Recent Posts

What are our rights? - Can our homes be raided just like this?

Need advice on brakes

Been stalking for 3 years edy

Performance Tire Prices(Pls Contribute The Price & Location to buy)

Tire Price list Zth

Search

Online now

Enjoying Zerotohundred?