Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="EFN" data-source="post: 1033104" data-attributes="member: 1416">ALL 4A-GE 20V has a factory Rev-Cut at 7800RPM, but it will show anywhere from 8200 or 8300RPM (Specially on AE101 Silvertops, Blacktop AE111 will be a bit more accurate - specially those with Orange Speedo Panel)But if u are using ori Local AE101 Meter console, and it cuts at 7500RPM, it is quite possible that the Speed Sensor is not rigged properly and thus will cut prematurely - you might be running in "Limp Mode" or Safe Mode as most would call it.20V Speed cut will engage at around 190Kmh. But without Speed Cut, with AE101 body it is possible to reach up to 220Kmh - calculated using digital RSM with corrected tire size values.Bottomline, U kenot use local AE101 Speedo and RPM console - they are simply not accurate and tend to be a bit light on the Speedo and Heavy on the RPM. Go find AE101 FX-GT Speedo Console and your problem will be solved, or change the whole dashboard+wiring with Levin/Trueno AE101/AE111</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

VAFC2 on non vtec engine?

hi all,
can the VAFC2 install at the non vtec engine?

thanks very much :)

Weekend drive.

We will be going up ulu yam for a hill drive this Saturday 30th July.

Meet at Sunway Extreme Park at 9.00pm

The usual suspects:
1) Skagee & Cheaka
2) Supremus
3) Jebu
4) Mr Nismo
5) DBSG guys
6) Kong (Dun FFK ah...

sifuss,please help

hi all,
my car got some problem
1)the check engine is on and never turn off.why?is it indicating problems in the engine?
2)petrol problem.when full throttle/max boost,can smell petrol from outside and even inside the...