Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="cuscostrutbrace" data-source="post: 645728" data-attributes="member: 3867">i have recently transplanted svt into ke70,engine wiring complete,but no dashboard wiringsince the engine does not come from halfcut..i got 2 problems1.cooling system:i have closed the original water inlet and outlet at the head and make a new pipe outlet at cylinder no 1..and the inlet at the back of the water pump,the suprising thing is,when i pour water into the radiator,it doesnt come out at the outlet at cylinder no 1,but radiator appears to be full,so i try pour water at the outlet pipe first instead,it also doesnt come out at the water pump..i have checked the pump,all in perfect condition..then i shoot air using the airgun at the water pump inlet at the block,i can feel no air at the head outlet..strange!...it's like the head and the block are seperated by a plate.2.the engine cant idle,the airflow sensor flap doesnt even seems to be sucked in to its idling position,and the engine cant maintain rev...it only can be revved,and must constantly being revved,or it will die.i have monitored the AFM action,when i crack open the throttle,it does suck the flap,but when i hold the throttle at certain point,the AFM slowly closes,causing the engine to die,unless if i hold the AFM open with my finger,then the engine can maintain rpm.it's like the engine cannot hold vacuum at part throttle..i am certain i have closed all hoses and no vacuum leak at the intakethen i try plug out the AFM socket and remove the AFM completely,the engine can idle,at 800rpm,but revving very sluggish and backfires through the intake,and it cannot rev pass 4k rpm but it can hold rpm though...the ecu seems fine,AFM voltage fine,TPS voltage fine,cam timing fine,ignition not yet to be checked but the engine have been transplanted as if,no fiddling with all those thingPLEASE HELP...i need the car to be finished by the end of this month...my classes gonna start next month</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Did anyone know about this trek wny 6121 red in color

Am taking this trek all my loan done and now waiting for the payment out probably this week that I can get the car

[FS] S15 rear light

Good condition,no scratches.Good to keep as spare...

Price:SOLD

Contact:016-2217111

Location:S'ban/kl

http://i6.photobucket.com/albums/y239/bvalve/parts/S15rearlamp.jpg

Tomei Race Manifold

Product
Tomei Race Manifold

Discription
Claimed the best flowing headers on the market, this has been through the "EXPREME" service channels,
*CAD DESIGNED
*ENDLESS BENCH TESTS
*2 Years of R&D
*Lite weight...