Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Korollarulez" data-source="post: 1277386" data-attributes="member: 23615">albertpcl,I asked the difference (ie. mounting) between the ori one and the local made one from the dealer, the ori one will definitely lasts longer but the price is way too expensive compare with the local ones. For 4 engine mounting local made would probably costs u RM200 only whereas the ori ones RM500. My advise - get it checked at the SC first which mounting need to be replaced, b'cos normally the front and rear ones will easily be worn-out first...then get the ORI ones...less headache! If you're rich then get it fixed at the SC, the labour charged there is very expensive RM250 to change the mounting... Your previous owner probably changed the mounting already, but he changed it with the local one kot?It's up to u, for me I will NEVER go to wing hing again...NEVER. I went there last few weeks to ask for the price of one absorber...they said RM130 per piece, I asked THRICE (3 times) to get conformation, then the NEXT DAY I went there again to buy, they said it's RM135, wah! so fast naik RM5...I told the same guy (with glasses) yesterday I came he said it was RM130, what did he told me? "I NEVER met u before!" Come on lah it's not like it is last month or week, only yesterday lar...Chop shop can never guarantee that u can get a good/better parts, the price is about RM70 per piece, but again after some time u will have to change again... Decision is yours...</blockquote>

Verification

The Marketplace Latest

original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Now it's my thread been deleted again...

First of all, the reason I start a thread is basically to ASK what had happened to EvoZ thread on EXPERIENCE SHARIN'....It was a good & nice thread for LANCER / EVO OWNERS like me to gain some info based on EvoZ...

How to make indoor light dimmer when door closed (like BMW's)

Bros & sifus....i think this topic has been discussed, but I don't know where to put the capacitor.

I'm interested in making my indoor light to be dimmer once I close the door (like the BMW's). So how can I do that...

DIY anti-rust electronic thingy??

hi everyone

i receive an advertising mail, it saids
got things thing, u pasang to your car
it can stop rusting one... and 'electronically' stop the rusting

is there anyone out there got circuit diagram know how...