Rm8k Wira & Jazz GK5 ownership experience-A long way to go

[sanekit]

Most people go bigger for more contact. Unless your mod your engine until so powerful the clutch slips, then probably can consider. But if not, why bother, wasting time and money. Like I mention, even after my engine swap to 200bhp, still using normal Exedy clutch only......lol

if change bigger clutch, need to change bigger flywheel ah?

 

[vr2turbo]

if change bigger clutch, need to change bigger flywheel ah?[/QU

Have not change before. Even VR is using standard.......lol

 

[parakey]

if change bigger clutch, need to change bigger flywheel ah?

Yes. When people say larger clutch, that means a larger circumference. You will want a flywheel that matches or is bigger

 

[sanekit]

Yes. When people say larger clutch, that means a larger circumference. You will want a flywheel that matches or is bigger

ah ok. means no plug and play. got it.

 

[KHNG940413]

Wira update.

I had bought apair of drive shaft +oil seal=RM290
Labour+gbox oil=Rm150
Total RM440. Yup save a lot of $$$ when you go outside and buy yourself. Hahahahahah

 

[parakey]

Wira update.

I had bought apair of drive shaft +oil seal=RM290
Labour+gbox oil=Rm150
Total RM440. Yup save a lot of $$$ when you go outside and buy yourself. Hahahahahah

Much cheaper than initial quote. Good job

 

[KHNG940413]

Much cheaper than initial quote. Good job

Yes,I can save up some$$ to change the steering wheel. Hahahahaha
The steering come with the car is quite flat and does not suit my driving position.
My leg is long but my arm is not so always need to adjust the seat to front. For long distance driving is a bit pain in the axs.

 

[KHNG940413]

Wira Update.

After changing the drive shaft & gbox oil. The car now is smooth no more shaking while driving fast.
Juz a little thing bother me. Last week I go for service and I forgot to tell them to use 10-50 engine oil instead they use 20-50 to my wira.
Okay....the car felt a little bit heavy while accelerating. Might go and diy myself to swap out the engine oil back to 10-50 or 10-40?

 

[sanekit]

Yes,I can save up some$$ to change the steering wheel. Hahahahaha
The steering come with the car is quite flat and does not suit my driving position.
My leg is long but my arm is not so always need to adjust the seat to front. For long distance driving is a bit pain in the axs.

pasang those quick release boss kit and a nardi deep corn. hehehe

 

[vr2turbo]

Wira Update.

After changing the drive shaft & gbox oil. The car now is smooth no more shaking while driving fast.
Juz a little thing bother me. Last week I go for service and I forgot to tell them to use 10-50 engine oil instead they use 20-50 to my wira.
Okay....the car felt a little bit heavy while accelerating. Might go and diy myself to swap out the engine oil back to 10-50 or 10-40?

If not mistaken, 20w50 comes in SS and Mineral only. 10w50 should be FS........

 

[KHNG940413]

pasang those quick release boss kit and a nardi deep corn. hehehe

Mine have the bosskit alreaedy but didn;t have the quick release function. Might change a deep dish to suit my driving position.Hahahaha

 

[KHNG940413]

If not mistaken, 20w50 comes in SS and Mineral only. 10w50 should be FS........

Yup,I might chang back to 10-50. Mayb diy myself since I know how to change already.Hahahahaha

 

[KHNG940413]

Another thing I wanna ask.

Do anybody know the nut size for the crossmember? Mine is abit loose.

 

[gunnerzz]

Another thing I wanna ask.

Do anybody know the nut size for the crossmember? Mine is abit loose.

Its either 17 or 19,not sure the specific thread spec.
Too tight or too loose will result in vibration when driving.

 

[KHNG940413]

Its either 17 or 19,not sure the specific thread spec.
Too tight or too loose will result in vibration when driving.

Ok,noted
Will go to shop to check on it.Thx