Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="weikee" data-source="post: 2429514" data-attributes="member: 34166">Today since nothing much to do , i change the ecu ground lugs, and also reground (not normal grounding -ve to body and engine). What you need,-some Lugs "sliver lugs its better" you need minimal 6 that can fit size 10 bolt-size 10 spanner or T, (if you change your battery -ve bolt, need the correct spanner also normally its size 13)-1 Meter earth wire (no need expensive) go electric shop buy awg 10, or awg 8 wires also ok (like the amp cable). cost no more than RM 5/Meter. I use my old harness wires (from my previous car)-Solder Iron, and lead. best its 40 to 50watt- PVC Tape, get the high quality one. I use 3M High Temp tape (can withstand 130c heat <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" /> ) this its the same tape i use when building a S13 track car some years ago. You normally can get it at the electric shop selling high voltage cable. (pasar road got).What todo01) Open the top Engine cover (for A32) 2 nut and 1 bolt, you will see 4 earth wires, connected with 4 lugs. after so many years of driving the lug and cable contacts will not be good, especially this lugs and wires are not solder.02) replace the lug with the new silver lug please solder the lugs. Tape the wires, doing so will prolong your wires due to excessive heat generated by your engine.03) make one earth cable using the 8awg wire and lugs.04) connect the custom made cable to the same location the ecu earth its.05) bolt the lugs together06) Connect the other end of your earth cable to your battery -ve terminal.07) Close your engine cover.To make things simpleBeforeECU---------------EngineAfterECU----------------Engine--------------(-ve Batt)</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

My toyota mr2 TRD widebody HYBRID...

its for sale and check out the link.......
spread the love around cheers :driver:

http://www.zerotohundred.com/newforums/cars-for-sale/310431-toyota-mr2-widebody-trd-2000gt-hybrid.html#post3957465

any gtt done this in K.L...

i dont have any idea where to do it in K.L..
please guide me sifu.
tq

Anyone got SARD 60mm Exhaust Temp Gauge Installation Manual?

Hie,

I want to DIY my sard ext temp gauge, but i bought a second hand one and the previous owner lost the manual... Can anyone help me scan a copy and email it to me??

[email protected]

Thanks