Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="speedchaser" data-source="post: 1154965" data-attributes="member: 5171">Wooo.. haven't been here a few days and so many posts. Might as well chime in into my favourite subject. :)First thing is I will never compare a standalone with a OEM ECU because the advantages of the OEM had been mentioned countless of times. I believe this topic comes from upping more timing on the Toyota with a standalone and squeezing more power out of it. No offence meant, if reliability is an issue then we should be keeping everything stock standard.My first 4AG 16V (TVIS) was fired up in 1993 with all the go fast bits like cams, Webers ‘45s etc.. which I’ll not go into and it lasted me all this years with RPMs to 8k everyday (not everytime though). No re-builts or overhauls. That was before standalone was popular. I changed to GZE in 2003 for the sake of changing not because the old engine was bust. That’s what Toyota reliability is to me.There was a saying way back then, “If a part of the engine needed a 20mm bolt, Honda will put 20mm and Nissan will put a 25mm but Toyota will put a 40mm!” Look at the GZE con-rods and you’ll see what I mean.As for a standalone, do not confuse 3D maps with overlapping 2D or 3D maps. A 3D map is built upon 2 constants, ie; the RPM vs Load and the value on it is the 3rd which is the variable that constitute a 3D map. Start your excel and built up one and you’ll know what I mean. On the RPM vs Load, at a constant of 3,000 RPM there will be different Load points, that’s 2D and at a constant load point with you can have different RPMs, that’s another one. Intersperse it together and you’ll get your 3D map for RPM vs Load. Do that with RPM vs Ignition and you get another 3D map. Do that with RPM vs Throttle angles and you’ll get another one. Intersperse it together you will have overlapping map points for references.No offence meant again, a standalone 3D map is a reference to pinpoint a variable against 2 constants and not the other way round.Take a look at this chart and you'll see what I mean.http://www.speedchaser.net/misc/rpm%20vs%20load.jpg</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Congratulation to MLOC PRESIDENT (Pengantin Baru !)

I'll like to share with all that our President just became 'Raja Sehari' yesterday.

Would like to congratulate him and give him a toast !

It wasn't an MLOC event so it was kept 'low profile' but nevertheless, to...

Dream color

Hello people,

Heheheheee what is your dream colour for your Altezza?

Planning to change new colour….

Btw,
Im new in the forum... enjoy it so much :adore:

well,Currently my ride in Black
Altezza Auto model 2000...

Some Items To Let Go...

Some E7, 8, 9 Items To Let Go And Looking 4 Some Parts...

Ori Work Emotion 18'' Rims -114.3 x 5 , 8.5"jj And Ori Bronze Colour With Work Emotion Ori Caps & Maxxis Tyres 75% - RM 5000 Or Swap Wit...