Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kaminari" data-source="post: 4386309" data-attributes="member: 100">Hi bro,I think I better reply here instead of PM. Valve clearance for RB26 during cold start IN 0.45mm EX 0.38mm with valve max lift IN 9.80mm, EX 9.87mm (for your cam 270). Since your cam 10.25mm lift, you may choose to opt it by using shim but there is disadvantage using outer shim which tend to tilt out from the lifter bucket at high rev.Each valve comes with different shim thickness and need perfect measurement up to 0.01mm for clearance adjustment.Would recommend you change to TOMEI valve lifter which comes with 1mm thick high so It`s not necessary to use thick shim and merit for high rev. Still you need inner shim to adjust the clearance.It`s more suitable for 10.25 above spec such as 10.42 / 11.12mm OEM cam spec:240°in, 236°ex ,lift: 8.58mm in, 8.28mm ex</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

2010 KLIMS - Perodua introduces new prototype - The 'Bezza'!

https://www.zerotohundred.com/wp-content/uploads/2010/12/2010-Kuala-Lumpur-International-Motorshow-88-600x398.jpg

Perodua today showcased its next generation prototype model – the Perodua Bezza and its future green...

picture

https://www.zerotohundred.com/forums/attachments/139239.vB

https://www.zerotohundred.com/forums/attachments/139242.vB

https://www.zerotohundred.com/forums/attachments/139243.vB

Mitsubishi Evolution 7.5 "GT-A" - RM139k (nego) For SALE

Fully evo9 bodykit,

Crystal White Carbon fiber interior,

Dual layer C-West dry carbon fiber hood,

6-pot Grippen chrome calipers & 355mm slotted discs (fr), 4-pot...