Performance camshaft OR PnP Stage 3

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search
Hi, i owned a neo cps(m), lightly mod(fuel regulator, cam gear, lighted cam pulley, drop-in k&n, 421 header, EMS1.

The problem is my car cannot go more than 180kmh. Other gears can go to 6.5-7rpm but when in 5th gear rpm drop to 5.5 when speed is 180kmh. Any other cps experience this?

My question is, does neo cps have speed limiter? Can i remove it? And what is the best next mod to increase performance?

Try to work on the cam settings 1st. No point if the settings are incorrect / not precise but you go change the crank pulley..additional time and money spend.

Perhaps..
due to the nature of the gearbox, limiting the top speed to just 200-215 kph..
 
ya Izlan, i suspect it's ur LCP, so sell it to me cheap2:tongue:
 
Try to work on the cam settings 1st. No point if the settings are incorrect / not precise but you go change the crank pulley..additional time and money spend.

Perhaps..
due to the nature of the gearbox, limiting the top speed to just 200-215 kph..

Bro, i tried few difference settings. Not much different on top speed. Which setting works best for u? U dont think it is the lcp that cause this? How about the lack of power going up hill?

Thank u in advance bro
 
Bro, i tried few difference settings. Not much different on top speed. Which setting works best for u? U dont think it is the lcp that cause this? How about the lack of power going up hill?

Thank u in advance bro


Remember. Never blame the hardware that u have..
Going uphill with a lightened crank pulley should be easier..as there's more torque at lower / mid RPM range.

To me, there's no one setting that fits all.
There's no such thing as i gain good top speed & gain good pick up at the same time.
It does not work that way bro..

I can not recommend any set up..as you already have a piggy back. Go ask your tuner. Or re tune you EMS.
 
Just curious about changing to a bigger size piston or high compression type. Can CPS crankshaft able to hold it?? Any bro tried before? Actually what is the actual size of the original cps piston?? How big can it change to?
 
Hi, i owned a neo cps(m), lightly mod(fuel regulator, cam gear, lighted cam pulley, drop-in k&n, 421 header, EMS1.

The problem is my car cannot go more than 180kmh. Other gears can go to 6.5-7rpm but when in 5th gear rpm drop to 5.5 when speed is 180kmh. Any other cps experience this?

My question is, does neo cps have speed limiter? Can i remove it? And what is the best next mod to increase performance?

i tthink may be the lighted cam la.....mine stock cam can go up to 200km....no ems no piggyback...just metal drop in filter, iridium plug, volt stabilizer and cold air intake
 
Just curious about changing to a bigger size piston or high compression type. Can CPS crankshaft able to hold it?? Any bro tried before? Actually what is the actual size of the original cps piston?? How big can it change to?


changing to a bigger size piston or high compression type. Can CPS crankshaft able to hold it??

Yes

Any bro tried before?

Yes

Actually what is the actual size of the original cps piston??

76mm

How big can it change to?

76.25mm
76.50mm
76.75mm
77.00mm
 
Always focus on intakes 1st. then only do up on your exhaust.

whats the point of having a big pussy but a small dick right?
 
Where do you stay ? if Klang Valley , I can bring you to a few satria neo's workshops and you can ask them and compare it :)

Dori-Dori ( batu tiga , shah alam )

Wazi ( Kota kemuning )

Gcar ( Old klang road )
 
Last edited:

A thread every 60 seconds


Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom