Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="khoyos" data-source="post: 3279312" data-attributes="member: 711">if ur using a big turbo with all the power up top, then u might need some high degree cams n high lift to make the engine able to rev very very high (usually for drag n racing engines) for street use, then tomei 260 or hks 264 would already be more than enough to provide miracles to the powerband. injector/fuel pump depends on ur setup.price between rm2.5k to the "sky's the limit" for various types of cams u want.if ur only gunning for the sound, instead of the performance gains, just run a straight pipe exhaust without muffler. will get similar head-turning attention when passing by crowds of people using only some change in ur pocket...what u might want to ask is "what cams are skyline GTR owners here using, with what engine spec" so that u can get a guideline on what to choose depending on what is similar to ur setup...i used hks264 before (but not on RB26) and oh my, it is by far the most entertaining mod EVER! the high rpm power was just amazing! and that was not even with hks 272...</blockquote>

Verification

The Marketplace Latest

Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Honda Ignition Twin Charge and Protech_IIR

Hello All,

Happy New Year 2013 to ALL...

My mom Old Honda 1989....

R & D on Honda distributor which now modify to Twin Charge on ignition.:rofl...

Altezza 6mt flywheel

Dear members.I need help from you guys.Anyone has Altezza flywheel to let go or knows where to get?

O2 Sensor voltage

bros,
as far as i understand, O2 sensors should produce a voltage between 0-1V
so i went ahead with the diy project for the AF ratio ...and somehow..
when i tried to measure the voltage with the multimeter...