Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="fobs" data-source="post: 3099630" data-attributes="member: 50688">mine no flabbing, but compared to the steel bonnet, this cf hood can allow water to masuk,... i was without the chute thing going at the air filter, but after install this cf hood, need to put that thing back, so that water that go in cannot bertakung in the hole.i only posted raya msg here lehhh,... got raya sms meh?? hehehe!!! raya still going on,... can wish everybody few more times!anyway, other than white/black and also silver, other colors seems to fade,... unless u are using 2K with glasurit etc etc,...sireuro's red cf4, same color with bulet's red sun,... also fading.anyway, that red milan red is super nice on the cf/cl,... maybe retain that color, but put more lacquer layer on top,...i think install bonnet pins lah senang,...my skeleton and top layer still mated to each other, so no problem yet.i dun think glue can take the force induced by wind at 160km/h,... needless to say 280km/h???anyway, bro faisal,... if the front lock is latched, i dun think there is any possibility for the whole thing to fly off. Also, the two front adjustable height rubber,.. u should adjust it to exactly press against the top layer of the hood,... the skeleton might flab though,... some self tapping screws might do the trick.else,... apply glue (epoxy resin, the part A + part B thingy),... then only screw in self tapping screw,... u hv to make sure the top layer and skeleton is fully mated/bonded/bersekedudukan,... else the flabbing will always be there,... imagine how much vibration is induced to the front of the car,...</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

First Impressions: 2022 Golf GTI & Golf R Line, now assembled in Malaysia

VW'S MK8 Golf GTI finally arrives, alongside the 1.4TSI R-Line and what's more, they are both assembled right here in...

call me twisties!! :D

been in my head for months edi, just lazy, so woke up today at 8am got nothing better to do, took out my air ram, measure the opening and starts cutting away, its a 30mins job with porper tools

+ve effect
-engine...

Small hairline crack at exhaust portion of turbo

How would the turbo behave if there is a small hairline crack at this part of it?

New to turbo stuff... thanks sifus.
edit: This isnt the turbo, just a picture I borrowed only...