mods on Accord CF4

[fobs]

construction example

we price something in comercial : rm1
we price something in O&G : rm5

u do the maths,... hahahhaaa!!!

Bump: eh,... f20b-T expensib than h23a?
up here i think abt same price.

 

[aja]

Got anyone working at office today ka?.

Me still at ofis ler...bz preparing / finalising business plan nih. monday got presentation 2009/2010 business plan. poning poning !!

Esok, gtg to JB lak.

BTW, kitmzet ko lepak kat mana JB?. Wanna jumpa kat Tebrau City boleh la kot, provided my discussion tu tak lame leh.

Bila la mau jadi kaya ni. Stay at home. Let $$$ work for us pulak, not like now. We work for them $$$

 

[fobs]

Got anyone working at office today ka?.

Me still at ofis ler...bz preparing / finalising business plan nih. monday got presentation 2009/2010 business plan. poning poning !!

Esok, gtg to JB lak.

BTW, kitmzet ko lepak kat mana JB?. Wanna jumpa kat Tebrau City boleh la kot, provided my discussion tu tak lame leh.

Bila la mau jadi kaya ni. Stay at home. Let $$$ work for us pulak, not like now. We work for them $$$

i ular-ing in ofiz
12noon nak belah, tgk plumber kerja at rumah new

aja,... u not kaya or not enuf kaya?


huhuuhuuu!!! byknya maybach krabat royal,... sape mau, saya emailkan.

Bump: cf/cl no go join gathering???

 

[Sato]

i ular-ing in ofiz
12noon nak belah, tgk plumber kerja at rumah new

aja,... u not kaya or not enuf kaya?


huhuuhuuu!!! byknya maybach krabat royal,... sape mau, saya emailkan.

Bump: cf/cl no go join gathering???

Kaya where got enough one ? The more u earn...the more u spend.....

Any CF/CL representatives to the gathering ? Hehhee.... if not...later they say we CF/CL cocky woo..hahah

 

[bulet]

supposedly i go to that gathering, but my wife wanna shopping today. we go shoppinfg ler with thinking of return back home b4 3pm, should be sempat la...but now just sampai rumah at 5pm..xde harapan la kluar dah...plus faisal also didnt go hehehe..................

bien, really sori......next time we jumpa2

 

[fobs]

dgr reporter cakap 40 bjik attend

one cf4,... whose???

 

[bulet]

hehehe...just coming back from gathering..hahaha...after wrote above post, thinking of melawat kejap..then terus stat enjin to cyberjaya, 30 minutes later arrived....pira oredi there waiting for me, abe faisal arrived on 6 30pm huhu

later i post some pic la...

 

[5efte]

Got anyone working at office today ka?.

Me still at ofis ler...bz preparing / finalising business plan nih. monday got presentation 2009/2010 business plan. poning poning !!

Esok, gtg to JB lak.

BTW, kitmzet ko lepak kat mana JB?. Wanna jumpa kat Tebrau City boleh la kot, provided my discussion tu tak lame leh.

Bila la mau jadi kaya ni. Stay at home. Let $$$ work for us pulak, not like now. We work for them $$$

Wah present Business Plan ke tak pe bole pakai Blue Ocean Strategy!!!

 

[nksc]

post jgn x post..

fobs..i wanna see those maybach..post..jgn x post too..

 

[fobs]

post jgn x post..

fobs..i wanna see those maybach..post..jgn x post too..

aiya,... gmail kompeni,...
tak blh opn,...

satt i email to nksc, u see can open or not.

Bump:

post jgn x post..

fobs..i wanna see those maybach..post..jgn x post too..

email address mana?

 

[amdfaisal]

aja... normally the bigger the displacement (or shld i say the longer the stroke) the higher the low-end torque will be that's why the H23 has very good low end-torque and it comes earlier at 5.xk rpm... and with bigger mass, the rev limit will be of course lower (K24 and K20 rev limit comparison for example). then the tech comes into play lah... lighten internals, square engine, under-square etc...

fobs,
2 x CF4 present
1 x CL1 present

I was there for like 15 or 20 minutes... :)

 

[nksc]

my email add is [email protected]

 

[fobs]

my email add is [email protected]

juz sented
u tryed and seeed can opened or not

 

[nksc]

okiee dookie mummie daddie caddie paddie pookie

tenkiu..dat one powerpoint file..

the best car..the last one..hahahaha

 

[5efte]

aja... normally the bigger the displacement (or shld i say the longer the stroke) the higher the low-end torque will be that's why the H23 has very good low end-torque and it comes earlier at 5.xk rpm... and with bigger mass, the rev limit will be of course lower (K24 and K20 rev limit comparison for example). then the tech comes into play lah... lighten internals, square engine, under-square etc...

fobs,
2 x CF4 present
1 x CL1 present

I was there for like 15 or 20 minutes... :)

If u pakai 2.3 stroker kits. Then u should make balanced engine. No need to install lightened flywheel or kapak ur crank shaft. Pistom size 87mm is enough. My experince with turbo car....
Now famous in market specs is B16A with vtech 1.8GSR crank shaft & balanced engine. Class F Sepang Drag Racing. Timing is almost 13 sec.

 

[wan_iswandy]

morning eberibodi..

i'm going KL today.. any TT planning tonite? if have, maybe i can join..

 

[kitzmet]

Got anyone working at office today ka?.

Me still at ofis ler...bz preparing / finalising business plan nih. monday got presentation 2009/2010 business plan. poning poning !!

Esok, gtg to JB lak.

BTW, kitmzet ko lepak kat mana JB?. Wanna jumpa kat Tebrau City boleh la kot, provided my discussion tu tak lame leh.

Bila la mau jadi kaya ni. Stay at home. Let $$$ work for us pulak, not like now. We work for them $$$

aku lepak kat kg melayu majidee...ko baper ari kat jb?

Bump:

morning eberibodi..

i'm going KL today.. any TT planning tonite? if have, maybe i can join..

wan,how long u in kl?im goin to shah alam 2moro..maybe we can meet up there

 

[amdfaisal]

so tmrw nite a small TT in shah alam anyone? kitzmet... will you go to PG afterwards?

 

[fobs]

so tmrw nite a small TT in shah alam anyone? kitzmet... will you go to PG afterwards?

bro suah already taken the mugens,... coming saturday he will balik and bring for me.
then only the WOrk rims can take off my car.

kizmet dtg??? come weekend lerr,.. senang.

can tt with bro suah also

Bump: entah why my personal powerpt cannot opn that file
ofis pc can,...

hmmm,...
nksc,.. u post in forum lerr,...

see those maybank,.. eh,.. maybach,...

 

[aja]

If u pakai 2.3 stroker kits. Then u should make balanced engine. No need to install lightened flywheel or kapak ur crank shaft. Pistom size 87mm is enough. My experince with turbo car....
Now famous in market specs is B16A with vtech 1.8GSR crank shaft & balanced engine. Class F Sepang Drag Racing. Timing is almost 13 sec.

Kapak2 the crank...that one really cannot tahan nih.. hehehehe

...but frankly speaking, my experience driving big cc car (for Manual Tranny la, auto I think not much effected ), the low-end really drag/struggle ler. But of course, whenever it's within powerband, then top-speed is sap-sap soi. or else, try to rev the engine on Nuetral, really heavy.

BTW, today not going to JB, but Melaka in the afternoon since my appointment venue changed last min doh. So, tak jumpa si Katmez ler!