mods on Accord CF4

[bulet]

830 am- rv at bhp petrol station
900 am- departing to genting
930 am- lepak2 while having breakfast...tak tahu mana mau lepak, time jumpa kat bhp kita discuss
1130 am- turun genting, short touge lalu ulu yam n back to kl
1230 am- lepak lagi, tak tahu kat mana...those who have work or need to leave can do so

yg ada:
alwhitesat
shahrul
idie
faiz
hizal
jimmy
najib
cat77
aja

uiks....ada jalan2 ka?..giler jeles...
if i know earlier maybe i can be safety car or escort car or lembab car hheheh....really free that day la.
these days always seen cf4 with black mugen wing park around my house. siapa ek?

 

[Sato]

no serious.. she is a nice girl.. goody goody type.. not very very very pretty but not ugly.. good for wife... rich family too... reason becos you are a nice guy so tot wanna recommend you.. luckily i'm not gay if not i bantai you ady... hahahahaha...

Hahaha...RICH FAMILY...sounds tempting !

Very nice of you. Maybe when i go KL baru introduce la.... been like 7 days a week also working.

So what car u drive now ?

 

[fairy]

Stock ECU rev cut at 7900 rpm? How come my rev cut is at 7400 rpm?
Mine not original Euro R ECU ???

if you can post the code we could help verify..

sifu sifu otai otai

now i'm having the f20b undergo major service. Now at abt 220k kms
timing belt change, etc
including fixing replacing gasket/seal underneath,... the culprit for the major leak/drip is the flywheel seal,...

gbox and engine now divorced,... engine on the mechanic's bench
all mountings to be replaced
and the EPS+module also replaced

should i also buka the head and change the valve seals?
the f20b telan/hadam abt half liter of engine oil every 3k kms,... mechanic says normal, since i have oil dripping all these years. If no other problem and the car can vtec as usual, no need spend time/money to change the valve seals,... info : plugs are dry. No evident white smoke can be seen visually.

abang fobs, change the valve seals :) B and F series notorious for valve seal leak.. rev the car to max and see... the engine i overhauled which is in our bro pyang's car cost me rm 6k.. hehehe..

Hahaha...RICH FAMILY...sounds tempting !

Very nice of you. Maybe when i go KL baru introduce la.... been like 7 days a week also working.

So what car u drive now ?

i got it all planned out.. to get her must ngurat her mum 1st.. hehehehe... i drive slow kete now... hehe

uiks....ada jalan2 ka?..giler jeles...
if i know earlier maybe i can be safety car or escort car or lembab car hheheh....really free that day la.
these days always seen cf4 with black mugen wing park around my house. siapa ek?

abang bulet :) rindu kat you..

Bro fobs,

Alang-alang sudah barai, kasi tukar itu valve seals semua... Satu kali kasi jalan semua..
Also make sure do port n polish, kilat like a mirror, 3 angle cut, so easier to belah the air+fuel mixture, hehehe...

agreeeeeeeee :)

 

[aja]

Why everyone's H22A rev cut not same? I thought all should be same for the rev cut.

MIne last time rev cut only RM5000rpm lah..lagi teruk!

---------- Post added at 03:02 PM ---------- 6 hour anti-bump limit - Previous post was at 03:01 PM ----------

sifu sifu otai otai

now i'm having the f20b undergo major service. Now at abt 220k kms
timing belt change, etc
including fixing replacing gasket/seal underneath,... the culprit for the major leak/drip is the flywheel seal,...

gbox and engine now divorced,... engine on the mechanic's bench
all mountings to be replaced
and the EPS+module also replaced

should i also buka the head and change the valve seals?
the f20b telan/hadam abt half liter of engine oil every 3k kms,... mechanic says normal, since i have oil dripping all these years. If no other problem and the car can vtec as usual, no need spend time/money to change the valve seals,... info : plugs are dry. No evident white smoke can be seen visually.

Fobs,

Get the quotation first. In case harga melampau tinggi, worth to get the engine kosong/halfcut instead

 

[alwhitesat]

hold on ED,... we will get some experts here to comment,...
just ensure us that your cf3 is jdm or wat? rhd or lhd?

and bien, if you're around, could the cf4 or cl1 rack/module fit?
we've got plenty of them here,..... and i'm swapping a cl1 one into mine at the moment, since i'm having a major service being done.

---------- Post added at 12:22 PM ---------- 6 hour anti-bump limit - Previous post was at 12:19 PM ----------





correct



not true



so true

pening,...

all correct!!!

mine was at 8200

not true.. my eps died b4 100k... and trust me, you wont be worried bout check light.. you'll be worried if your arms are not as strong as malek noor the muscle man... hehe.. and when that happens you will be looking for a replacement set urgently.. taking corners at 200kmh is real nice with a kong eps..

abang faisal salam and hug hug.. hehehe

not too difficult, use 2nd or third gear and rev till max and you will know the cut:)

abang cat... :)

abang fobs

oh ya, met abang semuaputih at exhaust shop.. sempat tt together :)

---------- Post added at 06:25 AM ---------- 6 hour anti-bump limit - Previous post was at 06:23 AM ----------

hey geng.. where is bro sato??? sato san.. where are you? and how is things going with your chick?? i got 1 very nice and good girl to recommend you...

ya lor...it was nice meeting u

sifu sifu otai otai

now i'm having the f20b undergo major service. Now at abt 220k kms
timing belt change, etc
including fixing replacing gasket/seal underneath,... the culprit for the major leak/drip is the flywheel seal,...

gbox and engine now divorced,... engine on the mechanic's bench
all mountings to be replaced
and the EPS+module also replaced

should i also buka the head and change the valve seals?
the f20b telan/hadam abt half liter of engine oil every 3k kms,... mechanic says normal, since i have oil dripping all these years. If no other problem and the car can vtec as usual, no need spend time/money to change the valve seals,... info : plugs are dry. No evident white smoke can be seen visually.

just get an enjin kosong if it is cheaper

uiks....ada jalan2 ka?..giler jeles...
if i know earlier maybe i can be safety car or escort car or lembab car hheheh....really free that day la.
these days always seen cf4 with black mugen wing park around my house. siapa ek?

next time i'll sms u.......

Hahaha...RICH FAMILY...sounds tempting !

Very nice of you. Maybe when i go KL baru introduce la.... been like 7 days a week also working.

So what car u drive now ?

he drives a real type-r

---------- Post added at 02:45 PM ---------- 6 hour anti-bump limit - Previous post was at 02:42 PM ----------

haiyaaaa.....not sempat la abe dolah......always balik late one......hehehehe.....later we ask alwi to held a big TT.....

ur turn la pulak to organize a tt

 

[cat77]

no time wi......nowsday bz abit.....hehehehehe.....(alasan)....

 

[fobs]

MIne last time rev cut only RM5000rpm lah..lagi teruk!

---------- Post added at 03:02 PM ---------- 6 hour anti-bump limit - Previous post was at 03:01 PM ----------



Fobs,

Get the quotation first. In case harga melampau tinggi, worth to get the engine kosong/halfcut instead

my golf redline 6500rpm

aiyak,... f20b sudah start projek,...
and pomen cakap take off head will byk habis masa, which he dont have

abang fobs, change the valve seals :) B and F series notorious for valve seal leak.. rev the car to max and see... the engine i overhauled which is in our bro pyang's car cost me rm 6k.. hehehe..

enjin last time faisal punya kait kaitan is with me, but tak blh jalan liao, need to buka all also,... labor mahal oooo,... somemore the sdutip workshop hilangkan my ori documents, so cannot use. Enjin kosong in hapkat i think 3k or less,... but leceh register ini itu,...

so let it be,... tukar timing belt, do up the rest, stop leaking/dripping, costs maybe rm2k+++ since timing belt portion pun mau makan 1k liao,...

pranng another few years,...
look for a spare h22aR if can get cheap,... keep.

kawtim,...

tis car die also no sell,...

pening.

 

[fairy]

MIne last time rev cut only RM5000rpm lah..lagi teruk!

---------- Post added at 03:02 PM ---------- 6 hour anti-bump limit - Previous post was at 03:01 PM ----------



Fobs,

Get the quotation first. In case harga melampau tinggi, worth to get the engine kosong/halfcut instead

5000rpm cut during U-Turn... hehehe.. abang aja, that day i went to the maggi goreng place near your house.. tot wanna call but realised already 4a.m. hehe

my golf redline 6500rpm

aiyak,... f20b sudah start projek,...
and pomen cakap take off head will byk habis masa, which he dont have



enjin last time faisal punya kait kaitan is with me, but tak blh jalan liao, need to buka all also,... labor mahal oooo,... somemore the sdutip workshop hilangkan my ori documents, so cannot use. Enjin kosong in hapkat i think 3k or less,... but leceh register ini itu,...

so let it be,... tukar timing belt, do up the rest, stop leaking/dripping, costs maybe rm2k+++ since timing belt portion pun mau makan 1k liao,...

pranng another few years,...
look for a spare h22aR if can get cheap,... keep.

kawtim,...

tis car die also no sell,...

pening.

i like it.. keep the car bro fobs.. i wanted to keep mine but

 

[Sato]

Bro fobs already halfway euro r engine rite ? Red top already what ! Hehehehe....more oommppss.

Never ending story to F20b la....like mine....change 5 lugs.....abs now useless....no traction somemore.... then....knocking started.....somehow the ECU itself started to cut the power when detected knocking.....(is it true???) So...car lost to nissan sentra ! Hahahahaha.....so malu....

 

[fairy]

bro sato... we use human abs... hehe.. and seriously.. find a half cut and everything will be fine.. but must have a mech with passion..

 

[alwhitesat]

no time wi......nowsday bz abit.....hehehehehe.....(alasan)....

so busy kah??? ok, u tell me when....rasta like last time okay tak???


seems everyone is so active recently...that's gooooood

 

[cat77]

so busy kah??? ok, u tell me when....rasta like last time okay tak???


seems everyone is so active recently...that's gooooood

i followwwwwwwwwwwwwwww......

 

[Sato]

bro sato... we use human abs... hehe.. and seriously.. find a half cut and everything will be fine.. but must have a mech with passion..

Mine is halfcut la...but still f20b only....

So....i dun think anyone doing f20b AT with 5 lugs knuckles changed ? Mech said different speed already....so....abs keep working even u are stopping at 10km/hr !

Now...abs unplugged....no abs....like the car of the 80's ~ Hehehhe....

 

[fairy]

bro sato, if i'm not mistaken i think bro ali is running f20b with 5lug conversion... can anyone confirm this?

---------- Post added at 04:00 AM ---------- 6 hour anti-bump limit - Previous post was at 04:00 AM ----------

abang cat jom follow me go hehehehehehe...

 

[amdfaisal]

sato my F20B AT was with 5-lug knuckles... same thing with pyang's car... no prob watsoever with ABS... TCS maybe kot because euro R does not have TCS

 

[fobs]

Bro fobs already halfway euro r engine rite ? Red top already what ! Hehehehe....more oommppss.

Never ending story to F20b la....like mine....change 5 lugs.....abs now useless....no traction somemore.... then....knocking started.....somehow the ECU itself started to cut the power when detected knocking.....(is it true???) So...car lost to nissan sentra ! Hahahahaha.....so malu....

Mine is halfcut la...but still f20b only....

So....i dun think anyone doing f20b AT with 5 lugs knuckles changed ? Mech said different speed already....so....abs keep working even u are stopping at 10km/hr !

Now...abs unplugged....no abs....like the car of the 80's ~ Hehehhe....

have to ask the others whther any prob with 5lug conversion using cl1 knuckles
mine still 4lug, eventho i hv the rays united arrows in my storeroom, previously in faisals store,... hahahaaa

sato,... me red cover only

ystd nite went to see,... two days no progress,... nvm,... me no rush,...
car hanging 8ft in the air on jacks
engine bay viewable from underneath, kosong,...

---------- Post added at 10:01 AM ---------- 6 hour anti-bump limit - Previous post was at 10:00 AM ----------

sato san,... 10km/h, abs working,... not correct liao,...

get it checked

 

[Sato]

Surely there's a problem after i changed the 5 knuckles which affect the ABS and TSC.

When u guys change the knuckles...what else u need to change ? My mechanic change something else saying the gear differences which can't plug into the engine something.....

Since then....abs keep working and working.....like slowing down from 10km/hr to traffic stand still......the abs working ! Damn.....sometimes when u press the brake pedal on stand still.....u can hear the abs motor working sound also....hahaha....

Mech said can modify and reprogram the abs system.....somehow i might still need to wait till him free la....so..while waiting...unplug abs...hence...no traction also....both lights on the meter.

The <!> also didn't blink for ages....

Bro fobs....save the red top....change everyhing else underneath.....

 

[fobs]

dont want to change,... uncle stylo,... automatic

 

[cat77]

bro sato, if i'm not mistaken i think bro ali is running f20b with 5lug conversion... can anyone confirm this?

---------- Post added at 04:00 AM ---------- 6 hour anti-bump limit - Previous post was at 04:00 AM ----------

abang cat jom follow me go hehehehehehe...

follow u ka???? have to bring passport or not?????......

 

[Sil80-13]

If I use 2.5" piping. Can I use the rear muffler 2.75"? Is it too big or it's better I maintain to use 2.5" muffler?