Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Mitevo7" data-source="post: 1064730339" data-attributes="member: 59849">You can still use it as daily, if you are driving MT, i would suggest swap in the 4G93P, increase its rev to 7,900 rpm (rev cut here), mild high cams (both intake and exhaust). PNP (but not until mirror shine) intake and exhaust port, tuned length 4-2-1 headers, 2" exhaust pipes with good resonators and mufflers (for resonator, i always recommend custom), TM works ignition system and coils (this is give better power in ALL rev range). Lastly, optimize the AFR to 13-13:5. These are still consider mild modifications because everything is worked outside of the engine. We haven't even go into the internal of the engines yet :) All of this can somehow push up 180 bhp. For N/A engines, you need to rev it high to get the power you need, so don't expect low rev acceleration like modern turbo engines which can be found in VW, Audi, Ford.To add on, work on your clutch, short shifter and of course shifting skills, then you will no problem use all the power within your engine.</blockquote>

Verification

The Marketplace Latest

original rare R-Pride Wado Sakura flower 15x5jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing TC4 17x8jj...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG3...
- Started by david tao
- Chassis and Wheels
original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Altezza IS200 loss all keys

Hi,
My friend lost all he's keys for his Altezza IS200 1G-FE engine.
I know the engine won't start due to immobilizer even though he has a duplicate key (without transponder).

Is all the Altezza IS200 are equipped...

varis bumper for cp9a

hehe

finally got a bumper for my car

alfred:wanna exchange ur damm bumper with mine

:biggrin:

http://img.photobucket.com/albums/v369/ken_7216/varis3.jpg

made in japan:biggrin...

Diy - Ccc

Just sprayed my engine chrome today..the color is not bad...haven't heat the engine enough to test yet. Want to let it fully dried first... :ph34r: ...

This is the original camcover...surrounded by newspaper!! :ph34r: