Tq steven for your assist.. Will do mention it. TqHello... Bro... I steven using Mivec engine... Do call this number 0123155955 Jeremy...
All the foreman using Mivec engine... Just mention steven blue iswara.. Recommend u... Tq.
---------- Post added at 05:03 PM ---------- 6 hour anti-bump limit - Previous post was at 05:02 PM ----------
Kuala Lumpur area..
Bigger diameter good for top speed,small diameter good for pickup...2" good for mivec 1.6, for mivec 1.8 better go for 2.2" or 2.3".guys, need advise. What is the correct exhaust piping diameter for 1.8 mivec ? Some say go for 2" or 2.2" which diameter is best for city and highway driving. Current piping diameter is 1.7" which is good for city but highway feel like back pressure too much. My car take longer time to reach 180km. Thanks
thanx very much joe..if wanna mod the flange then u have to adjust the port shape in the cylnder head. so i think cut & weld method will be much easier. no need to touch cylinder head.
if wanna mod the flange then u have to adjust the port shape in the cylnder head. so i think cut & weld method will be much easier. no need to touch cylinder head.
u can go to nasty port flow since they can do this kind of modification :)thanx very much joe..
any place can recommend to to this mod with good workmanship..
cos i got spare mivec intake to do this..
seen in the net few person selling that already cut & weld..
now replica of skunk2 intake for 4g93 is already in the market. no need to mod anything if u r using 4g91/92/93/93t head. if mivec, still have to modify since mivec port shape is not identical with other 4g9 series cylinder head.I also been searching for this modifications, a bit confuse what i found in mudah. The Skunk2 original and plug and play 4g93 skunk2. Which one is suitable for mivec?
If i buy original skunk2 for b16, is it need to mod the flange according to size of gasket (mivec)? And what about S90 TB? need to use b16 S90 or 4g series S90 TB in order to match the skunk2.
Or there is plug and play 4g93 skunk2, i think its replica or purposely for 4g series. What is the pro and cons buying this? How its perform? same as original skunk2 b16?
Thanks...