Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="cipan_supercas" data-source="post: 2113527" data-attributes="member: 1945">Wow.... your list is so long..... feel lazy a bit to do the MS listing but here are some info on top of my head.MS have all the features you listed but some differences here;1. MS do batch injection but can be made sequential if using MS3 which is still under development. FYI, the mighty RB20/25 is also using batch injection and still produce great output. 4A-GE fires all the 4 injectors at once and still becomes the engine of choice for those drifters. In short, you'll say it's good if you take note of how that works but your mind starts to think something else when you thought that batch fire will create some drawbacks even though that's not the case. At high rpm, the time will become so close that the sequential injectors too will actually continuously inject fuel. 2. MS can be made to work as COP sequential ignition firing but you have to buy extra parts and configure it inside the software. it's that simple. However, to mount the hardwares on the engine is not that simple. Best option, use whatever configuration/hardware your existing engine have.3. Can work till 8 low impedance injectors without the resistor pack. Use the software to limit the current.4. Mapping is 12x12 but can be expanded to 24x24 if you need to which is usually not required.5. RPM setting is totally variable up to you. Not only the rpm limit is variable, you can adjust the mapping load/rpm according to your taste. You can even have till 25k rpm or 35k rpm. Up to you. The map is interpolated, so you don't need that every 500 rpm boxes. You can set at any no. you like to suit your application. Totally variable. You can also switch it to the 3D graph to tune.6. Real time dwell control.7. You can have some optionals too;7.1. Shift light7.2. Boost controller7.3. NOS control7.4. Water injection control7.5. Actually, you can control anything you like. Your choice and creativity. You can use coolant, rpm, air temp, MAP pressure, TPS, EGO etc. to act as your switch to activate your applications.8. You can configure MS to work with almost any engine, be it 2 stroke 1 cylinder motorcycle engine or that 4 stroke 8 cylinder muscle cars. You don't have to sent it back to the manufacturer to do that. It's diy.... Emmmm... talking about diy, won't you have that 'pride' too...???</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Pumped-Up Porsches!

http://img248.imageshack.us/img248/8067/64200717175bd1.jpg

Pumped-Up Porsches!

A ride in any one of these potent machines will leave you screaming for more.

While purists would argue that products from...

sumtin 4 yur mitsubishi

View attachment 615202 View attachment 615203

this january..

DiY wire mesh grill 2 bumper

guys...i have few pieces of spended metal grill...
those like diamond shape which they diy on the bumper o grill 1...
material is GI galvaniz...wont rust....

its 4 feet by 1 feet...enuf 4 most bumper...
did 4 my...