Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="mydendenmushi" data-source="post: 4212564" data-attributes="member: 53406">yes, its like mr bushidofang said..there are two version, hi-power and silent hi-power...mine is hi-power, thus no silencer..so its quite noisy (bassy noisy) when the rpm is ard 3000 to 4000, equal to 100 - 130km/h, which is my normal cruising speed.There are few ways for you to eliminate the bassy noise quickly though.1, rev passed 4500 rpm, which will take you to 140++km/h, or 2, drive it below 90km/h, or3, turn off the engineThe consequences are1, you can get lots of summon and increasing your possibility to crash2, you will arrive late wherever you go or you will die of boring3, you cannot go anywhereBecause i'm cruising a lot (60% highways) I'm already tired with the noise. Therefore thinking of changing it to the standard one.But dont get me wrong, this muffler's noise is very2 good at high rpm, esp when you're revving it in the tunnel, owh, I love that sounds! :Dso my plan is, to have two separate muffler..one for daily use, one for weekend, when you're in the mood of spinning the car, if you know what i mean..:pmustang007: you got PM</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Wheel Spacer Machine shop

I need a wheel spacer for a PCD 130x5 rim to a PCD 130x4 hub. I need a shop that can do good engineering work. Anyone out there can give me a few leads? :idea:

Thanks

Looking For E8 MR @ E9 Headlamp!

Hello guys....!

I'm looking for evo8 MR or evo9 headlamp.

Thanks!
:itsme:

DIY sleepy headlight

found it at another forum through sites...interesting....FYI

First take the length and width dimensions of the part of the headlight u want to cover. then just take some sheetmetal, and cut out 2 pieces...