Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="normality78" data-source="post: 4538828" data-attributes="member: 17">Guy's, given local accord 2.0l using kind of weird k20a7, * Engine: K20A7 * Bore & Stroke: 86.0 x 86.0 * Displacement: 1,998cc * Compression ratio: 9.8 * Max HP: 150PS/ 6,000 * Max Torque: 186Nm/ 4,500 Local CM5 2.4l accord was using k24a4 engine which rated below, it was merely 10hp differ. * Engine: K24A4 * Bore & Stroke: 86.0 x 99.0 * Displacement: 2,354cc * Compression ratio: 9.7:1 * Max HP: 160PS/ 5,500 * Max Torque: 218Nm/ 4,500 Im thinking, if i buy local k24 block and swap over on stock 2.0l, i should be able to gain higher hp then stock k24a4? what about using oversize piston with higher comp? I reckon wont be able to get as high torque as k24 but shld not be too far away from k24a4 rite?</blockquote>

Verification

The Marketplace Latest

Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

BMW Group introduces 2.0L TwinPower mill in BMW X3

BMW Group Malaysia announced earlier today, a new variant of the BMW X3 - the BMW X3 xDrive 20i. As per its namesake, this new variant employs use of BMW's efficient 2.0L four-cyclinder petrol mill, enhanced with...

looking for oem rx7 rims

any 1 selling oem mazda RX-7 FD rims 16x8" PCD 5/114.3, offset 50.????pm me thank or call 012-2341281

can diy short shifter?

i am wondering whter is it possible to diy a short shifter? as in shifts timing are shorter and not the shift rod is shorter...aha...
so anyone?