Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="GSR5559" data-source="post: 935228" data-attributes="member: 64"><p>i got this complain once. im located in kl but the complain was made in perak. got to travel all the way back to perak to settle things up, cant renew roadtax. complain was made becus of reckless driving. at last din pay anythin, jus tok to the officer and bullshit abit, done. btw as for inspection, it is better for u to make it all original, u dun need to find any bracket to fit in proton hood, oni need to adjust the position, still can use back ur current bracket, the difference is mivec hood the bracket is lower, for proton hood, bracket is higher. dats all. and yes if ur running on 4wd, confirm fail. btw i dun think ur running with 4wd rite, u stated 4wd fuel tank only, so i dun think it will cause any trouble. exhaust too big, if im not mistaken it is ok, as long it is not noisy den shud be fine. lowered? depending which inspection centre u go to, sum of the barrier height is different. cus to test the height u need to drive in and pass this one bump thingy, my fren told me about it, got some place the bump lower one, some is higher. but to be in safe side, ur car better to be 1 coke can and above height. tinted? hopefully is not VIPs black. different colour of hood i dun think it will be a big problem, tell them dat ur hood rusty, or gif some excuses which is logic saying u jus replace them and got no money to paint it yet. as for the plate number, i dun think it will be a big problem oso, as long the fonts are legal, not those shiny type or engrave type or even those sticker type. each letter spaces must be not too close to each other. u know msian enforcers, if they got nuthin to catch they will find sumthin else to do one. so jus becareful before goin in inspection. and i think they will attack those cars which look more like for racing purposes. good luck.</p></blockquote><p></p>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Getting Shanghai-ed with Team Aylezo Motorsports @ 2013 Lambo Super Trofeo Round 1 - Day 1

https://www.zerotohundred.com/wp-content/uploads/2013/05/DSC_4951.jpg

While the blistering heat from our own TIMETOATTACK at Sepang International Circuit has yet to wear off, another urgent assignment called us in...

Titan Shocks

Hi All,

Anyone used Titan shocks on their MR2 before?
My car using a serviced Tein. It is bouncing like a rabbit. Especially on highways, i look like a clown on springs......Is this normal???

Titan looks good :)

Walbro 255L VS Sard 265L fuel pump

plan to upgrade fuel pump . either buy Walbro 255 which is selling RM380 , or Sard 265 which is selling RM 7xx .

Can any 1 tell me about walbro fuel pump , any not good comment about it ? I kno it is quite noisy...