eterna brake disk

[pac_jb]

Hi .

Which car brake disk(front) will match the eterna's one, I'm using twin port Mitsubishi eterna for my perdana, but now got some problem with the front left disk, I'm unable to get only the disk from anywhere, just wonder which cars disk will match exactly to the eterna's one, want to change both left n right if got any.

---------- Post added at 04:06 PM ---------- 6 hour anti-bump limit - Previous post was at 02:41 PM ----------

Can I use the after market evo 3 disk pcd114?

 

[vr2turbo]

Hi .

Which car brake disk(front) will match the eterna's one, I'm using twin port Mitsubishi eterna for my perdana, but now got some problem with the front left disk, I'm unable to get only the disk from anywhere, just wonder which cars disk will match exactly to the eterna's one, want to change both left n right if got any.

---------- Post added at 04:06 PM ---------- 6 hour anti-bump limit - Previous post was at 02:41 PM ----------

Can I use the after market evo 3 disk pcd114?

Have you tried asking spare part shop whether after market have them. I was able to find Shoji brake disc for my twin pot VR4....

 

[pac_jb]

I found ar racing rotor for evo 1-3 ,rvr, 11 inches,pcd114, I think it should fit, since alot of people telling evo 3 n eternas twin port are the same..but there are some doubt, what if it don't fit, I have to order from kl ,I cant find it in jb.

 

[vr2turbo]

I found ar racing rotor for evo 1-3 ,rvr, 11 inches,pcd114, I think it should fit, since alot of people telling evo 3 n eternas twin port are the same..but there are some doubt, what if it don't fit, I have to order from kl ,I cant find it in jb.

Oh! you are not sure which model fits.

Paging bro. Danz. Eterna Expert.......

 

[^pomen_GTR^]

eterna i think fto share the same disc?

 

[vr2turbo]

eterna i think fto share the same disc?

Cannot think, because TS need to order from KL. If wrong, habis.....hhahhahahha

 

[DanzEterna]

y not upgrade it to VRG 4pot ones, but take note that there are 2 types, 5 speeder & 6 speeder.
the 6 speeder disc is slightly bigger, more expensive too.
need to fabricate a bracket for it & make sure your rims at least 8jj to clear the calipers.

 

[vr2turbo]

y not upgrade it to VRG 4pot ones, but take note that there are 2 types, 5 speeder & 6 speeder.
the 6 speeder disc is slightly bigger, more expensive too.
need to fabricate a bracket for it & make sure your rims at least 8jj to clear the calipers.

If not, what standard stock disc will fit?

VRG got many half cut? I think not many around like the VR, right?

 

[pac_jb]

Bought AR racing evo 3 rotor pcd114..276mm..fits perfectlly..

 

[vr2turbo]

Glad you got your brake disc settled....