Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kent75" data-source="post: 3947116" data-attributes="member: 15728">Based on my experience, specific part designed to handle the car's body, weight and etc to improve stability. There is no doubt that you can fit almost all chassis part of DC2 into EG's body, but sometimes the part is meant to be too good for certain chassis. For example, installing some aftermarket anti roll bars that is harder than TYPE R into a GSR body may end up causing the arm crack. Knowing your car chassis's potential and limitation is a very important step that cant be missed before proceed with any modification.There's a very good example too on absorber. Eg's absorber is designed to support EG's weight, length and etc. If we are installing EG's absorber into a DC2, in fact it's not so suitable that resulting too low or too harsh on a DC2.As a conclusion, study more on your own ride's specification and understand your need. Don't end up modify something that you don't like and force yourself to cope with it especially absorber.Hope this help.</blockquote>

Verification

The Marketplace Latest

original rare R-Pride Wado Sakura flower 15x5jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing TC4 17x8jj...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG3...
- Started by david tao
- Chassis and Wheels
original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

altezza front fog light

i am looking for altezza front fog light... anyone can help..???
sms me pls..0172828380

Any remarks on td05 18g

I was told recently that there are some problems with the td05 20g highbrid, so now only available td05 18g, any comments/using. Looking at doing this upgrade.
BTW what should my min size injector be for this upgarde?

Altezza Stuffs to let go

Fellas,

Just open up a chop shop specialised in Altezza and have few stuffs to let go at a bargain price. :regular_smile:

Rims:

Advan Siena Generation II 18 inch x 7.5 (front and Rear) + tyres + center...