DIY coolant replace + flush

abubin

Junior Member
Senior Member
Jul 13, 2006
22
0
1,501
Myvi which year? My Myvi 1.3 2009 total capacity(without reserve tank) is around 2.7 including everything inside the engine, shouldn't be 4 liter, 4 liter is alot. and the services manual mistaken written 5.7L, it should be around 2.7L.
Flush out 2.2 L i think is normal as still some coolant inside the engine block.
Thanks! What a relief to know it's not something I did wrong or the coolant system having issue.
 

Random Post Every 5 Minutes

Hi to all of ZTH'ers.

In this thread I gonna show I've replace brake master pump with the repair kit.
I've perform this operation on my wife myvi 1.3 AT with ABS.
The symptom is the brake pedal will go straight away to floor when press the pedal while driving. Everytime has to pump it 2-3 times until can feel the brake operate.

Tools needed
1- C clip plier
2- 12 mm spanner
3- 10 mm spanner
4- 8 mm spnanner
5- tubing
6- bottle
7- 10 mm open end hexagon spanner

1- Contain of...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience