Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="0909" data-source="post: 1402941" data-attributes="member: 29749">pater, in your quest to identify which ignition coil is faulty & it's subsequent replacement, take my advice...find a mech that's pro with cefiro & get him to buy from your preferred spareparts shop rather than yourself. otherwise, you'll be in hot soup when a situation like mine happens. here goes...if you've read my created posts, you'll notice that I experience vibration/jerkiness when idle. it was a result of changed plugs but the earlier mech knew nuts about cefiros (and bear in mind that i didn't pay peanuts...so shouldn't expect monkeys doing it!!). they swore by their bloody heads that the plugs were fine. yet, after sending to a new mech that changed the plugs back to my old ones, whoalla!! the prob's solved! fyi, the new plugs were original as attested by TC. the ratings were correct. it's NGK Platinum TFR 6G-11. now, the supplier rebutted my claims by saying for electrical stuffs, no warranty. coupled with the delay in informing them, it's impossible to make claim from their supplier, they say. however, the delay was attributed to the 'monkeys' that told me to "try & see for another few days-lor.." afterwhich the new plugs were installed resulting the vibration problem. after voicing out my dismay, they revert back asking me to check which plug out of the six I bought is faulty. WHAT??!! which mech will do this dirty & time-consuming job? (unless no business) it's not a mere un-plug & re-plug affair. yet, they have the audacity to ask this...jeez..i suggest that we should create a sticky for "blacklisted suppliers/mechs" coz i know a lot of us went thru' this stage, right?you see, the essence of the story is that you check price, ask your preffered mech to buy from that particular shop & subsequently install it. if the parts don't work or cannot rectify the apparent problem, suppliers must accept the returns. if not, no mechs would not even pay (coz they have credit terms), let alone to buy again from them. and mechs talk around...they would spread the news fast amongst themselves when such a case happens. in short, the mech's bargaining power is significantly above ours (consumers). now, i'm awaiting the autoparts shop's response from their supplier. fingers crossed that they won't "tai-chi" me around. otherwise, i'm bringing this matter up to the consumers tribunal court for my due refund!</blockquote>

Verification

The Marketplace Latest

original rare Enkei ES Tarmac 15x7jj offset +35 4H...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing SE37 17x7.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Does ck 4g93t (terbalik) share some parts frm the older 4g93t?

Can ck 4g93t(terbalik) use aftermarket piston/conrod/bearing meant 4 the older 4g93t?

Greetings everyone, i've got some noob questions here..

1: Can the ck gsr(terbalik) use the wiseco pistons+duratech...

install recaro sr3 seats into FD

hi guys,

had anyone try to install recaro sr3 seats (i.e; evo3,civic ek9, integra dc2) into your FD?

As I know, the railing will need some modification that is not a real problem for me.

My only concern is, will...

Anyone can DIY soundproofing my WIRA A/B?

I think my question is rather confusing,I just need anyone can soundproof my wira a/b completely, eg:
- doors
- floor
- roof
- bonnet
- fenders

How much roughly the time taken to finish those all?
how much roughly...