Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="afahmi" data-source="post: 2837004" data-attributes="member: 25561">hi,i just about to advise u to reduce the fuel pressure.i also experienced the same problem when i had "direct wiring" to my mr2 fuel pump...jerking when want to full throttle..at first i set it to 38 psi..i use this setting almost 1 year[my FC damn teruk]..and this month i went to dyno and guess wat..my car runing too rich..my a/f ratio for rpm 2.5 and above = all under 10..even the graph cannot show the a/f anymore bcoz too rich..after dyno,my pressure also same like you 30 psi..but somehow my boost has been reduce from 0.72 to 0.69..i guess the tuner bring it down a bit to get the optimum result..</blockquote>

Verification

The Marketplace Latest

Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
Mercedes Benz W213 E63 AMG Body Kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Anyone know where to Fully Service TEIN Dampers??

Hi to All Zerotohundred's..

Just a question : Anyone know where to Service TEIN Dampers here in Klang Valley / Petaling Jaya / Subang Jaya / Sunway / Shah Alam or even Kuala Lumpur...

Is it worth it?

Hi All,

Im hoping to be a future Altezza owner :)

Been sourcing mine for the last couple of weeks now... i have a budget of approximately 100k +/- 10k

More specifically, I have been looking for Manual version...

Fixing adjustables

hey guys n gals.....anyone tried installing adjustables by yourselves??

i've been going through some web sites n it does'nt look that difficult(if u had the spring compressors n all)....easier said than...