Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Supra_Fanatics" data-source="post: 3730513" data-attributes="member: 66184">Wow...your seg has already upgraded to 1.8cc arr? That's what my friend wanted to do actually by adding a 7afe engine block or something like tat to his 4age. My friend actually found a pajero ATF cost RM130 I'm not sure if i shud get this pajero one or get some better oil cooler like u said the aluminium oil cooler type. What is the brand of that ATF that you have two bro? I bet u enjoy driving ur SEG more than the Altis right?Since is good and cheap I might get the same one as urs. Hayden one that i showed u is brand new but it cost RM340 for the small one. Like u said bigger one might no be suitable for our car. All the while i think my dad have been using Toyota Engine oil or the Mobil one. My friend can get Castrol Engine oil for RM90 - RM100 so guess i would use Castrol Engine oil which is better. I change Engine Oil every 5K Km and ya I meant 3K Km not 3km lolz! You pump petrol everyday? Damn man how fast u drive everyday? lolz! 1 day RM70 really kills man...Ya 12K for piston heads is nuts...and can gain extra 60HP? Hard to believe on an NA. My fren said with that kind of money we can actually mod a lot and gain a lot more with the right parts installed and modified. Told me not to waste money on that RM5300 Kit (UNIchip + NX Express) for NA like i said can only gain 10 - 15% HP is kinda expensive for such low HP gained.He actually told me not to mod much on Altis. I told him i wanted to change to 4-1 Extractor and he said no! if 4-2-1 okay. He said altis is already a perfect car with good parts and if wrong parts and modification is done, might hurt the engine or like u said decrease in power. What his advise is either swap in 2zz-ge or do a Turbo Bolt on which is much simple and less complication. Will u do a Turbo Bolt on to gain more HP and Torque? I read about the open pod that u told me to google. A guy asked if he shud install it and most of them recommend open pod and not close pod. If close pod sure lost of power. Sorry for late reply by the way bro. It has been quite a while. Busy reading and doing some stuffs.</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Wheel studs too short

Its been a while..been out of modding since got kids..

Anyway, I have aftermarket wheels but the center is thicker, thus not enough of the stud is going thru.

Anyone have any idea to get something like this...

To downpipe OR NOT to downpipe?

I just want to share some experience of having an aftermarket downpipe which I installed last Saturday.

Before this, I've done some research and some comments I read about having aftermarket downpipe has improved...

Q about lancer gt >>>

to sifu have been using lancer gt..do any problem with the car??? how much it cost about one time maintainence (change engine oil) ????